Abstract:HVDC restart failure can cause the DC power interruption, which may further result in the transient power angle of the rectifier-side AC system to go unstable. Concerning this problem, a transient stability analysis method considering dynamic changes of converter topologies during the whole process of the DC restart failure is proposed. First, dynamic energy models of the DC terminal and the AC filter in the whole process of the DC line restart failure are built, including the 'restart at fault', phase-shifted triggering and deionization stage. On this basis, according to the Lyapunov's second theorem, the variation rate of the aperiodic component of generator dynamic energy is defined as the dissipation rate of dynamic energy, which characterizes the accumulation or the consumption trend of total system energy. Thus the stability of the system is assessed according to the dissipation rate of dynamic energy. Then, effects of the dynamic energy of the DC terminal and the AC filter on the dissipation rate of dynamic energy in the whole process of DC restart failure are illustrated, and the cause of the transient instability of the rectifier-side AC system is revealed. Finally, hardware-in-the-loop tests in RT-LAB verify that, when the amplitude of the generator outlet bus voltage rises during the 'restart at fault' and phase-shifted triggering stages, the dynamic energy of the DC terminal has a positive effect on the dissipation rate of dynamic energy, induces the total system energy to keep accumulating, which is not conducive for the stability of the system. In the deionization stage, the dynamic energy of the AC filter has a positive effect on the dissipation rate of dynamic energy, which is not conducive for the stability of system.

An Adaptive Restart Method for DC Transmission Line in LCC-HVDC System

A Recovery Method for HVDC Systems Following AC System Faults

A Novel Recovery Strategy to Suppress Subsequent Commutation Failure in an LCC-Based HVDC

A Predictive Method of LCC-HVDC Continuous Commutation Failure Based on Threshold Commutation Voltage Under Grid Fault

Optimal Power Distribution Method for Wind Farms to Enhance the FRT Capability of the LCC-HVDC System under Commutation Failure

Study on reliability improvement of current-transferring type HVDC circuit breaker

Current-limit control method to prevent subsequent commutation failure of LCC-HVDC based on adaptive trigger voltage

Receiving-end AC Fault Ride-Through Method of Hybrid HVDC Transmission Based on Adaptive DC Voltage Reduction

Research and optimization on DC line fault recovery strategy used in Gui-Guang HVDC project

An Adaptive Reclosure Scheme for Parallel Transmission Lines with Shunt Reactors

A Strategy of Adaptive Reclosure for AC Lines on the Inverter Side of AC/DC Hybrid Grid

Adaptive Sequential Reclosing Strategy for Hybrid HVDC Circuit Breakers in MMC‐based DC Grids

An Adaptive Reclosing Scheme Based on Phase Characteristics for MMC-HVDC Systems

Overview of Adaptive Reclosing Technique and the Challenge Faced in AC/DC Hybrid Power Grid

An Improved Continuous Commutation Failure Mitigation Method in High Voltage Direct Current Transmission System

A Fault Current Limiting Approach for Commutation Failure Prevention in LCC-HVDC Transmission Systems

Fault security region modeling and adaptive current control method for the inverter station of DC transmission system

An Enhanced MMC-HVDC Topology and System Recovery Strategy for DC Fault Protection

Adaptive Advancement Angle Compensation for Suppressing Commutation Failures during Rectifier- and Inverter-Fault Recovery

Receiving-end AC system fault ride-through control strategy of LCC-FHMMC hybrid HVDC transmission system

Research on the transient stability of HVDC rectifier-side AC system during the whole process of DC restart failure