Abstract:Advances in Structural Engineering, Ahead of Print. Stratospheric airships require a lightweight envelope to contain lighter-than-air buoyancy gas, making the lightweight design and pressure-bearing performance of the envelope structure a key research issue. The stress state at different cross-sectional positions of the airship envelope structure is different, resulting in a low utilization rate of the overall material performance of the envelope structure. This paper proposes a design scheme for reinforcing envelope structures with sliding reinforcing cable to improve the bearing capacity of the composite fabric structure while reducing its weight, ultimately achieving the optimal strength-to-weight ratio. Two types of composite fabric structures (A-airship and B-airship) were subjected to inflatable burst tests, and the strain changes in the envelope gores were analyzed by digital image correlation. Through re-assembly of the broken composite fabric pieces and analysis of their tear textures, crack origination positions, failure causes, and the stress behavior and state at the failure position were identified. An envelope structural model with consideration of the cutting pattern effect was established, allowing the stress distribution of the envelope to be analyzed and the damage positions to be more accurately predicted. Based on the analysis of the ultimate pressure-bearing performance of an airship envelope structure, a novel idea of incorporating coupled tensile-shear stress into the strength criterion was proposed. Through the data in the study and existing references, it is verified that the strength criterion can accurately predict the ultimate pressure-bearing performance of the envelope structure.

Mechanical properties of UN-5100 envelope material for stratospheric airship

Bi-axial tensile test method and analytical algorithm of elastic constants for the airship envelope fabric

Analysis and Evaluation of Strengthening Effect of Inflatable Rings on Soft Stratospheric Airship

Uni-axial tensile mechanical properties and elastic constants of airship envelope material

Experimental Study on Uniaxial and Biaxial Tensile Properties of Coated Fabric for Airship Envelopes

Mechanical properties analysis of architectural PVDF/PES fabrics with uni-tensile and bi-axial test

Mechanical Properties and Strength Criteria of Fabric Membrane for the Stratospheric Airship Envelope

Investigations of the Mechanical Behavior of Naturally Weathered Envelopes Based on a Long-Term Service Airship

Mechanical Properties of Woven Fabric Composite for Stratospheric Airship Envelope Based on Stochastic Simulation

Biaxial Tensile Properties and Elastic Constants Evaluation of Envelope Material for Airship

Study of the Mechanical Properties and Elastic Constants of Aerostat Envelope Fabric under Cyclic Tensile Loading

Tearing Analysis of A New Airship Envelope Material under Uniaxial Tensile Load

Tearing Behaviors of Flexible Fiber-Reinforced Composites for the Stratospheric Airship Envelope

Response Surface Characterization for Biaxial Tensile Properties of Envelope Fabrics under Multiple Stress Ratios

Yarn Tensile Experiments and Numerical Simulations Based on the Decomposition of Stratospheric Airship Envelopes

Experimental study and refined numerical simulation of ultimate pressure-bearing performance of rope-reinforced airship envelope structures

Initial Configuration and Nonlinear Mechanical Analysis of Stratospheric Nonrigid Airship Envelope

Investigation of Mechanical Behavior of Weld Seams of Composite Envelopes in Airship Structures

Experimental Study on Uniaxial Tensile and Welding Performance of a New Coated Fabric for Airship Envelopes

Analysis of Elastic Parameters for Laminated Fabrics Used in Airships under Biaxial Stresses

Tear Strength of a Laminated Fabric for Stratospheric Airship under Uniaxial and Biaxial Tests