Abstract:A low power and low phase noise phase-locked loop (PLL) design for low voltage (0.8 V) applications is presented. The voltage controlled oscillator (VCO) operates from a 0.5 V voltage supply, while the other blocks operate from a 0.8 V supply. A differential NMOS-only topology is adopted for the oscillator, a modified precharge topology is applied in the phase-frequency detector (PFD), and a new feedback structure is utilized in the charge pump (CP) for ultra-low voltage applications. The divider adopts the extended true single phase clock DFF in order to operate in the high frequency region and save circuit area and power. In addition, several novel design techniques, such as removing the tail current source, are demonstrated to cut down the phase noise. Implemented in the SMIC 0.13 mu m RF CMOS process and operated at 0.8 V supply voltage, the PLL measures a phase noise of -112.4 dBc/Hz at an offset frequency of 1 MHz from the carrier and a frequency range of 3.166-3.383 GHz. The improved PFD and the novel CP dissipate 0.39 mW power from a 0.8 V supply. The occupied chip area of the PFD and CP is 100 x 100 mu m(2). The chip occupies 0.63 mm(2), and draws less than 6.54 mW from a 0.8 V supply.

A Novel Charge Pump with Ultra-Low Current Mismatch and Variation for PLL

A High Swing Charge Pump with Current Mismatch Reduction for PLL Applications

A Perfectly Current Matched Charge Pump with Wide Dynamic Range for Ultra Low Voltage Applications

Design of Charge Pump for High-Speed Phase-Locked Loop

A New Type of Charge-Pump Circuit for Low-Voltage High-Speed PLL Application

A Low Mismatch Current Charge Pump Applied to Phase-Locked Loops

A regulated charge pump with wide current driving capability for low-voltage applications

A Charge Pump with Perfect Current Matching Applied to Phase-Locked Loop in 65nm CMOS.

A 0.6V High-Swing Gate-Switching Charge Pump for PLL with Current Self-Matching Technique in 28nm CMOS

A Novel CMOS Charge-Pump Circuit for High-Speed PLL Application

Design of an Improved High Performance Differential Charge Pump

A low current mismatch and deviation charge pump with symmetrical complementary half-current circuits

A Low-Power RF CMOS Charge Pump PLL

A 0.8 V Low Power Low Phase-Noise Pll

Analysis and design of dynamic matched charge pump in pll

A Low Power Sub-GHz PLL with Optimized LO Distribution Circuit

A 0.8-V, 2.55-Ghz, 2.62-Mw Charge-Pump PLL with High Spectrum Purity

A Low Power Sub-GHz PLL with Optimized Class-C Voltage-controlled Oscillator

A High-Performance Charge Pump with Improved Static and Dynamic Matching Characteristic.

A Fully Differential Charge Pump with Accurate Current Matching and Rail-to-rail Common-Mode Feedback Circuit

An improved Phase/Frequency Detector and a glitch-suppression charge pump design for PLL applications