Abstract:The compressive mechanical properties of concrete-based materials are strongly affected by the presence of additions in the mix and load application velocity. Fiber-Reinforced Rubberized Concrete (FRRC) was recently proposed in the literature as a concrete-based material with the aim of obtaining a ductile material with reduced environmental burden and characterized by excellent energy absorption performances during impact loading. FRRC joins and balances the advantages and drawbacks of Fiber Reinforce Concrete (FRC) and Rubberized Concrete (RuC). However, its behavior has rarely been investigated under dynamic loadings, although gaining sufficient knowledge on their high strain rate behavior is crucial for their full-scale application. This study aims to investigate the high-strain rate compressive behavior of FRRC with fine rubber aggregates and micro-straight steel fibers. Tests were performed using conventional quasi-static loading with a compressive testing machine and high-strain rate tests with a 080-mm Split Hopkinson Pressure Bar (SHPB) for strain rates up to 200 s(-1). The experimental program comprises the characterization of Plain Concrete (PC), FRC, RuC, and FRRC with a full test matrix (a total of 192 specimens) covering fiber contents up to 1.5% and rubber volume substitution ratios up to 30%. The micro-scale characterization of the material using SEM scans provided a complete understanding of the observed macro-scale behavior. A high-speed camera was used to capture the cracking development processes. The measurements both for quasi-static and dynamic tests indicate that the addition of fibers improves the ductility or toughness with a slight increase in the compressive strength and the substitution with rubber aggregates significantly reduces the compressive strength with improved ductility or toughness. The combination of fiber and rubber (FRRC) leads to a combination of the previously described single marginal effects. The dynamic tests reveal the marked strain rate dependency, although specimens with large rubber volume substitution were more sensitive to the strain rate effect within the considered test range. Based on the test data, data-driven models for strength reduction factor (SRF) and dynamic increase factor (DIF) are proposed for different types of FRRC. The image-based waveform discussion provides evidence of the "double-peak" phenomenon highlighting the different features of the observed signals and damage evolution. Ultimately, this study indicates that FRRC has an excellent high-strain rate compressive behavior and can be a promising material to be employed to protect structures against impact and blast loads.

Behavior of FRP-confined Ultra-High Performance Concrete under Eccentric Compression

Stress-Strain Behaviour Of Frp-Confined Concrete Subjected To Eccentric Compression

Experimental Investigation on Large-scale Slender FRP-Concrete-Steel Double-Skin Tubular Columns Subjected to Eccentric Compression

Compressive Behavior and Strength Prediction of Ultra-High Performance Concrete Confined by Normal and High Strength Steel Hoops

High-strain rate compressive behavior of Fiber-Reinforced Rubberized Concrete

Study on Behaviors of FRP Confined Stub Concrete Filled Square Steel Tubes under Axial Load

Axial Compressive Behavior and Load Carrying Capacity Prediction of Prefabricated UHPC Tube Filled with Seawater Sea-Sand Coral Aggregate Concrete

Analysis and Behaviour of FRP-confined Short Concrete Columns Subjected to Eccentric Loading

Compressive behavior of ultra-high performance concrete confined with FRP

Axial Compressive Behavior of UHPC Confined by FRP

Compression performance of FRP-steel composite tube-confined ultrahigh-performance concrete (UHPC) columns

Constitutive models of ultra-high performance concrete (UHPC) under ture tri-axial compression and an analysis-oriented model for FRP-confined UHPC

Behavior of hybrid PET FRP confined concrete-filled high-strength steel tube columns under eccentric compression

Behavior and modeling of FRP grid‐reinforced ultra‐high‐performance concrete under uniaxial tension

Axial Compressive Behavior of Engineered Cementitious Composite Confined by Fiber-Reinforced Polymer

Eccentric Compression Properties of FRP-Concrete-Steel Double-Skin Square Tubular Columns

Experimental investigation on eccentric compression behavior of FRP-confined concrete-encased cross-shaped steel columns

Shear Behaviour of FRP-confined Concrete/uhpc Core-Encased Rebar: Experimental Investigation and Design Method

Behavior of Hybrid CFST with FRP-confined UHPC Core under Axial Compression

Experimental and Numerical Investigation of Axial Compression Behaviour of FRP-Confined Concrete-Core-Encased Rebar

Experimental research on mechanical behavior of UHPCFST under repeated axial compression