Abstract:For a long time, chemiresistive gas sensors based on metal oxide semiconductors (MOSs) suffer from higher operating temperatures, resulting in higher energy consumption and instability of the sensors. Generally, a MOS-based chemiresistive gas sensor being able to work at room temperature is considered to be outstanding already. Here, a highly sensitive NO2 gas sensor based on the carbon dots-WO3 heterostructure, which can work below room temperature at -6 °C, is fabricated. At 18, -1, and -6 °C, its detection limits are 200 ppb, 5 ppm, and 20 ppm, respectively, and the corresponding response values (Ra/Rg) are 1.11, 1.04, and 1.13, respectively. The sensor exhibits good selectivity, stability, and linearity between relative humidity and response values too. A peculiar response behavior was observed. Toward oxidizing gas NO2, the resistance of the sensor based mainly on n-type WO3 shows decrease behavior. Its peculiar response behavior and strong gas sensing ability at lower temperatures were elucidated theoretically using the results of first-principles calculations. The reduction of NO2 into NO by surface oxygen vacancies of WO3 and the following adsorption of NO on the surface of WO3 lead to electron transfer from NO to WO3, and the Fermi level shifts toward the conduction band, making the sensor exhibit the peculiar response behavior. The stronger adsorption capability of carbon dots toward NO2 and a synergistic effect of carbon dots and WO3 together make the sensor capable of working at lower temperatures and own higher sensitivity.

Porosity and oxygen vacancy engineering of mesoporous WO3 nanofibers for fast and sensitive low-temperature NO2 sensing

Unraveling the Effect of Oxygen Vacancy on WO3 Surface for Efficient NO2 Detection at Low Temperature

Au-WO 3 Nanowire-Based Electrodes for NO 2 Sensing

Unraveling the Effect of Oxygen Vacancy on WO 3 Surface for Efficient NO 2 Detection at Low Temperature

Nanowires-assembled WO3 nanomesh for fast detection of ppb-level NO2 at low temperature

Ultrafast NH3 Sensing Properties of WO3@CoWO4 Heterojunction Nanofibres at Room Temperature

Highly sensitive NO2 sensor based on mesoporous ZrO2–WO3 nanotubes composite

Metal–Organic Framework-Derived Cuo Tube-Like Nanofibers with High Surface Area and Abundant Porosities for Enhanced Room-Temperature No2 Sensing Properties

Three-in-one Ni Doped Porous SnO2 Nanorods Sensor: Controllable Oxygen Vacancies Content, Surface Site Activation and Low Power Consumption for Highly Selective NO2 Monitoring

g-C3N4 templated synthesis of 3DOM SnO2/CN enriched with oxygen vacancies for superior NO2 gas sensing

Fabrication and Computational Study of a Chemiresistive NO2 Gas Sensor Based on the Carbon Dots-WO3 Heterostructure for Operating below Room Temperature

Pompon-like Ni doped ZnO mesoporous microspheres for conductometric NO 2 sensing properties at room temperature

Self-heated WO3 nanowires for selective and sensitive detection of NO2 gas at room temperature

Hollow WO3/SnO2 Hetero-Nanofibers: Controlled Synthesis and High Efficiency of Acetone Vapor Detection.

Ultrasensitive Ppb-Level NO2 Gas Sensor Based on WO3 Hollow Nanosphers Doped with Fe

Tunable NH4F-Assisted Synthesis of 3D Porous In2O3 Microcubes for Outstanding NO2 Gas-Sensing Performance: Fast Equilibrium at High Temperature and Resistant to Humidity at Room Temperature.

Design and Synthesis of Parallel Bicomponent Heterojunction Nanofibers as Flexible Room-Temperature Sensors for Ppb-Level NO 2 Detection

Hierarchically Porous Zno Derived from Zeolitic Imidazolate Frameworks for High-Sensitive Mems No2 Sensor

Highly Sensitive, Selective, Flexible and Scalable Room-Temperature NO2 Gas Sensor Based on Hollow SnO2/ZnO Nanofibers

Tailored formation of WO3-rGO nanohybrids for dependable low temperature NO2 sensing

Mesoporous In 2 O 3 /ZnO heterogeneous microtubes replicated from waste willow catkins for high response and rapid detection of NO 2 gas at low temperature