Abstract:Nitrogen dioxide (NO2) is a major pollutant, causing acid rain, photochemical smog, and respiratory damage. The annual safe limit is 50 parts per billion (ppb), while concentrations exceeding 1 part per million (ppm) can result in respiratory ailments. Conventionally, n-type metal oxide semiconductors operating at elevated temperatures have been utilized for NO2 detection. Recently, p-type semiconductors with their hole accumulation layer, rapid recovery post-gas exposure, and good humidity tolerance are being investigated as potential NO2 sensors, once again working at elevated temperatures. In this work, a room-temperature (27 ± 2 °C) NO2 sensor is demonstrated by using a nanocomposite based on p-type bismuth ferrite (BFO) nanoparticles and silver nanowires (Ag NWs). This nanocomposite is capable of sensing a NO2 gas concentration of up to 0.2 ppm. The BFO nanoparticles are synthesized via a sol-gel route followed by sintering at 500 °C to form the crystalline phase. Nanocomposites are obtained by formulating a dispersion of the BFO nanoparticles and Ag NWs, followed by direct writing on both flexible and rigid substrates. The Ag NWs act as the conducting pathway, reducing the overall electrical resistance and thus enabling room-temperature operation. X-ray diffraction, scanning electron microscopy, and surface area studies provide phase information and surface morphology, and the porous nature of the film helps in room-temperature gas adsorption. The current-voltage and gas-sensing behavior are studied to obtain the optimized molar ratio (4:1 BFO/Ag NWs) for the sensor. The sensor deposited on poly(ethylene terephthalate) (PET) also works under a bent condition, indicating good flexibility. Rapid NO2 sensing was achieved in a BFO-Ag/PET device with response/recovery times of 7/8.5 s and 12/15 s in straight and bent geometries, respectively. Additionally, a good sensitivity of 30 to 60% was achieved for the BFO-Ag/PET device across 100 to 1000 ppb of NO2. The development of a nanocomposite combining an active sensing element (BFO) and a charge-transport element (Ag NWs) opens up a multitude of other application areas.

Design and Synthesis of Parallel Bicomponent Heterojunction Nanofibers as Flexible Room-Temperature Sensors for Ppb-Level NO 2 Detection

Bioinspired supramolecular arrayed heterojunction-based room-temperature sensor for high-performance gas detection

Highly Sensitive, Selective, Flexible and Scalable Room-Temperature NO<sub>2</sub> Gas Sensor Based on Hollow SnO<sub>2</sub>/ZnO Nanofibers

Highly Sensitive, Selective, Flexible and Scalable Room-Temperature NO2 Gas Sensor Based on Hollow SnO2/ZnO Nanofibers

Construction of In2O3/ZnO yolk-shell nanofibers for room-temperature NO2 detection under UV illumination

Confined Formation of Ultrathin ZnO Nanorods/Reduced Graphene Oxide Mesoporous Nanocomposites for High-Performance Room-Temperature NO 2 Sensors.

Fabrication of Large-Area Au Nanoparticle Decorated ZnO@ZIF-8 Core-Shell Heterostructure Nanorods for Ppb-Level NO2 Gas Sensing at Room Temperature

Room temperature NO2 sensor with rapid recovery based on ZnO/In2O3 heterojunction

Interface Engineered WS2/ZnS Heterostructures for Sensitive and Reversible NO2 Room Temperature Sensing

Bismuth Ferrite-Silver Nanowire Flexible Nanocomposites for Room-Temperature Nitrogen Dioxide Sensing

Cu2O/CuO Hollow Nanospheres/Carbon Composites for NO2 Detection at Room Temperature

Gas sensors based on SnS 2 /In 2 O 3 for high performance NO 2 detection at room temperature

Design of Hetero-Nanostructures on MoS2 Nanosheets To Boost NO2 Room-Temperature Sensing

Synergistic CNFs/CoS2/MoS2 Flexible Films with Unprecedented Selectivity for NO Gas at Room Temperature

A Flexible and Wearable Nylon Fiber Sensor Modified by Reduced Graphene Oxide and ZnO Quantum Dots for Wide-Range NO2 Gas Detection at Room Temperature

ZnO/reduced graphene oxide nanocomposite with synergic enhanced gas sensing performance for the effective detection of NO2 at room temperature

Amorphous SiO2-based All-Inorganic Self-Supporting Nanofiber Membrane: A Flexible and Breathable Sensing Platform for NO2 Detection

Design of Hetero-Nanostructures on MoS 2 Nanosheets To Boost NO 2 Room-Temperature Sensing.

In-situ Construction of SnO2 Nanolayer-Sns2 Nanosheets Heterostructures for Enhanced NO2 Sensing at Room Temperature and Their DFT Investigation

Influence of Low-Dimension Carbon-Based Electrodes on the Performance of SnO2 Nanofiber Gas Sensors at Room Temperature

Engineering SnO2 Nanorods/ethylenediamine-Modified Graphene Heterojunctions with Selective Adsorption and Electronic Structure Modulation for Ultrasensitive Room-Temperature NO2 Detection.