Abstract:As interlayer cracking has become as a significant issue in ballastless tracks, investigating the mechanical properties and damage characteristics during uniaxial compression with non-coincident contact is vital for enhancing the operational performance of ballastless tracks. This study conducted experiments on interlayer non-coincident contact damage in double-block ballastless tracks with nominal normal pressures of 0.666 MPa, 1.244 MPa, 2.489 MPa, and 3.733 MPa. The research explored the relationship between normal load and normal deformation stiffness, analyzed the interlayer contact damage mechanism of concrete, and investigated the damage evolution mechanism under non-coincident contact conditions based on Acoustic Emission (AE) signals. The findings indicate that: I) When the nominal pressure is respectively less than and greater than 1.333 MPa, the normal deformation stiffness and normal load satisfy linear and power function relationships, respectively. II) The interaction of interlayer protrusions under non-coincident contact, combined with the outward expansion resulting from interlayer mutual compression deformation, are two significant factors contributing to the formation of tensile cracks, while the presence of significant shear stresses directly beneath the interlayer contact points is the primary cause of shear cracks. III) After loading, The ballastless track slab matrix remains undamaged, while the supporting layer matrix may experience comprehensive cracking when the nominal pressure exceeds 1.333 MPa. IV) During the stage of only interlayer interface damage, both tensile and shear cracks are the primary causes of concrete damage. In the stage where damage occurs to both the interlayer interface and matrix, tensile cracks play a dominant role. However, when comprehensive matrix cracking occurs, shear cracks take on a dominant role. The outcomes of this study contribute to a deeper understanding of the damage mechanisms of ballastless tracks under train loads following interlayer cracking. Particularly focusing on the evolution characteristics of damage under high interlayer pressure.

Developing Rules of Adhesive Properties and Mechanism of Ballastless-Track Sealants in Shear-Fatigue Loading

Cyclic and Postcyclic Triaxial Testing of Ballast and Subballast

Low-temperature Adhesive Properties of Sealant Applied in Ballastless Track under Shear Fatigue Loading

Adhesive Characteristic and Mechanism of Ballastless Track Sealant in Hydrolysis Condition

Test Method on Adhesive Property of Joint Sealant in Supporting Layer of Ballastless Slab Track

Mechanistic Characterization of Fatigue Damage Process and Failure Predictions of Asphalt Binders

Developing Rules of the Bonding and Micro Properties of Ballastless Track Sealants Under Ultraviolet Aging Environment

Investigation of the Fatigue Behaviour of a Ballastless Slab Track–Bridge Structural System under Train Load

Direct Shear Properties of Railway Ballast Mixed with Tire Derived Aggregates: Experimental and Numerical Investigations

A Novel Fatigue Cohesive Model for Interface Between Ballastless Track Slab and Self-Compacting Concrete

Investigation on Interface Damage between Cement Concrete Base Plate and Asphalt Concrete Waterproofing Layer under Temperature Load in Ballastless Track

Research on the mechanism of railway ballast shear performance under various sand contents and load conditions

Quantification of Railway Ballast Degradation by Abrasion Testing and Computer-Aided Morphology Analysis

Investigating the fatigue performance of conventional reinforced concrete CRTS III ballastless track structures using a fatigue damage constitutive model

Evaluating the Effect of Rail Fastener Failure on Dynamic Responses of Train-Ballasted Track-Subgrade Coupling System for Smart Track Condition Assessment

Mechanical properties and damage evolution features in uniaxial compression with non-coincident interlayer contact in double-block ballastless track

Fatigue behavior of CA mortar

Discrete Element Analysis of Shape Effect on the Shear Behaviors of Ballast

Macro-and-micromechanical responses of ballast under triaxial shearing using coupled DEM–FDM with flexible and rigid membranes: a comparative study

Mechanical Characteristics and Failure Mode of Asphalt Concrete for Ballastless Track Substructure Based on In Situ Tests

Performance Assessment of Self-Healing Polymer-Modified Bitumens by Evaluating the Suitability of Current Failure Definition, Failure Criterion, and Fatigue-Restoration Criteria