Abstract:Electroplating sludge is extensively produced in chemical precipitation-based treatment of electroplating wastewater. It poses a huge threat to environmental safety if not properly disposed, ascribed to its high contents of heavy metals. An innovative metallurgical approach was proposed a to recycle Cu, Cr, and Ni from it. Ammonia leaching was firstly performed to selectively leach Cu from Cr, in which the Cu oxide and sulfide were leached into the leachate while the Cr oxide and Ni carbide (NiCx) retained in the residue. (NH4)2SO4 increased the Cu leaching rate via increasing the dissolved oxygen amount in the ammonia leachate and converting CuS to Cu2+. Under the optimal conditions, the leaching efficiency of Cu achieved 96.5 % while that of Cr was only 0.1 %. In the followed aluminothermic reduction, C in the leaching residue could be effectively removed via a thermal oxidation, which in turn decreased the formation of a C-containing compound of high melting point and benefited the Cr and Ni recovery. Cr and Ni from the residue were reduced and recovered in a Cr-Ni alloy, and the reductant of Al first changed to a refractory Al2O3 and then transformed to a low melting point 12CaO·7Al2O3 with the additive of CaO. This transformation increased the molten slag fluidity and promoted the separation of Cr-Ni alloy from slag. Moreover, the excessive Al increased the Cr and Ni yields and concentrated all of them to be together. Partial Al was used as reductant, and the other Al transferred into Cr-Ni alloy to decrease its melting point. Cr and Ni contents in the smelting slag could be decreased to 0.11 wt% and 0.12 wt% respectively, showing an efficient recovery. This work provided a high efficiency method to recover Cu, Cr, and Ni from waste electroplating sludge.

Hydrometallurgical Stepwise Recovery of Copper and Zinc from Smelting Slag of Waste Brass in Ammonium Chloride Solution

Hydrometallurgical Process for Zinc Recovery from C.Z.O. Generated by the Steelmaking Industry with Ammonia–Ammonium Chloride Solution

Purification And Comprehensive Recovery Metal Values From Zinc Hydrometallurgical Solution

Sequential Stepwise Recovery of Selected Metals from Flue Dusts of Secondary Copper Smelting

A New Process for Recovering of Zinc From Blast Furnace Sludge(Ⅱ): Solvent Extraction and Electrowinning

Application of Copper for Sufficient Metal Extraction from Zinc Leaching Residue: Process Optimization and Copper Reuse

Recovery of Cobalt and Zinc from the Leaching Solution of Zinc Smelting Slag

Test Research on Separate of Iron and Recovery of Copper,Zinc From A Acidic Leaching Solution of Zinc Hydrometallurgy Slag

Recovery and Separation of Silver and Mercury from Hazardous Zinc Refinery Residues Produced by Zinc Oxygen Pressure Leaching

Recovery of Copper, Lead and Zinc from Copper Flash Converting Slag by the Sulfurization-Reduction Process

A Cleaner Process for Valuable Metals Recovery from Hydrometallurgical Zinc Residue

An integrated and sustainable hydrometallurgical process for enrichment of precious metals and selective separation of copper, zinc, and lead from a roasted sand

Recovery of Valuable Metals from Copper Slag by Hydrometallurgy

Recyclable Recovery of Lead from Zinc Hydrometallurgy Residue: By NH 4 Cl-MgCl 2 Leaching and Novel Cyclone-Electrowinning

A metallurgical approach for separation and recovery of Cu, Cr, and Ni from electroplating sludge

Recovery of Cathode Copper and Ternary Precursors from Cus Slag Derived by Waste Lithium-Ion Batteries: Process Analysis and Evaluation

Selective Separation and Recovery of Valuable Metals Through Directional Vulcanization of Black Copper Sludge

Stepwise Utilization Process to Recover Valuable Components from Copper Slag

Study on the Removal of Chloride Ions in an Acidic Solution of Zinc Smelting by Green Method

Recovery of Zinc and Copper from Lead Slag by the Combined Process of Beneficiation and Roasting

Comprehensive Recovery of Valuable Metals from Copper Smelting Open-Circuit Dust with a Clean and Economical Hydrometallurgical Process