Abstract:Among a variety of fiber sensors, the fiber Bragg grating (FBG) sensor has numerous advantages over other optical fiber sensors. One of the major advantages of this type of sensors is attributed to wavelength-encoded information given by the Bragg grating. Since the wavelength is an absolute parameter, signal from FBG may be processed such that its information remains immune to power fluctuations along the optical path. This inherent characteristic makes the FBG sensors very attractive for application in smart material structure, health monitoring field et al. But FBG sensors are sensitive to temperature and strain simultaneously; it is necessary to analyze the characteristics of temperature and strain of FBG applied for smart structure. Short overview of the FBG sensing principle as well as theoretical analyses is presented at first; then the paper proposes a simple, convenient, and low cost experimental method to verify the performance of FBGs. The improved high-accuracy experimental instrument of thermal deformation, which consists of an accurate temperature controlling and measuring subsystem, supporting and adjusting subsystem, collimating and positioning subsystem and fine motion and measuring sub-system, is simply introduced. The proposed experimental method involves bonding one uniform FBG to the center of the pole, which is about 89.5mm long; another FBG temperature sensor is free in the temperature-control box. The temperature in the box is -20°C-+50°C is adjusted according to experimental schedule. The characteristics of the FBG are analyzed by actual datum, which are simultaneously collected by a PC through a FBG interrogator. Comparing the data of FBG bonded to the pole with another FBG temperature sensor in the free state, the characteristics of the temperature and the thermal strain of the FBG can be obtained. The experimental result shows the FBGs used to the smart material have good agreement characteristics with theoretical calculation of the FBGs.

Position Prediction of Soft Finger Driven by SMA Based on Fiber Bragg Grating Sensor

Structural Instability-Enabled Mechanical Sensors Using Fiber Bragg Grating

Finger Bending Sensing Based on Series-Connected Fiber Bragg Gratings

A study on fiber Bragg grating (FBG) strain sensor based on symmetrical lever structure

Design and Optimization of FBG Implantable Flexible Morphological Sensor to Realize the Intellisense for Displacement

Performance Analysis and Experimental Verification for Fbg Sensors Applied for Smart Structure

Shape Detection and Reconstruction of Soft Robotic Arm Based on Fiber Bragg Grating Sensor Array.

Monitoring Static Shape Memory Polymers Using A Fiber Bragg Grating As A Vector-Bending Sensor

Analysis of Strain Transfer in FBG-Based Embedded Optical Fiber 3-D Shape Sensor

Optical Fiber Bragg Grating Based Sensing System of Flexible Wearable Smart Sleeve for Tracking Human Arm Joint Movements

Deformation Monitoring and Shape Reconstruction of Flexible Planer Structures Based on FBG

Design and Measurement of a Parallel-Dual FBG Shape Sensor for Elastic Cantilever Beam Structure Shape Reconstruction

Study on the Design and Performance of a Glove Based on the FBG Array for Hand Posture Sensing

A High Sensitivity FBG Strain Sensor Based on Flexible Hinge

Soft Joint Shape Measurement Device Based on FBG with a Simple Demodulating System.

Embedded FBG Based Sensor for Joint Movement Monitoring

New Interpolation Method For Shape Sensors Based On Fiber Bragg Grating

Design of a wearable and shape-memory fibriform sensor for the detection of multimodal deformation

Research on Convex Fiber Grating Tactile Sliding Sensor Based on Mechanical Fingers

A three-dimensional fiber Bragg grating wrist force sensor with separation elastic structure

Study on the Structural Deformation Monitoring Based on Distributed FBG Sensing Techniques