Abstract:Abstract A finite element model is developed in ABAQUS/CAE to simulate the behavior of one-way reinforced concrete slabs under air-blast loading. Several published empirical equations have been utilized to model air-blast pressure, P(t), for different combinations of the explosive charges and standoff distances. The values of the peak overpressure have been taken from the field explosion tests conducted on four normal reinforced concrete (NRC) slabs of size 2000 mm x 1000 mm x 100 mm in the School of Civil, Environmental, and Mining Engineering, The University of Adelaide, Australia (2009). The slabs were doubly reinforced with HYSD steel re-bars of diameter 12 mm spaced at 100 mm c/c in the major bending plane (ρ = 1.34%) and 200 mm c/c in the other plane (ρ = 0.74%), where “c/c” is the center-to-center distance between two adjacent re-bars. A plasticity-based damage model for concrete and an explicit solver in ABAQUS/CAE are adopted in the finite element (FE) simulation. The available test results and finite element analysis predictions, including maximum mid-span displacement and damage to the RC slabs, are presented and weighed. The computed results are found in good agreement with the experimental ones. The validated model is used to examine the performance of RC slabs with 25% replacement of the conventional steel re-bars by the FRP re-bars of equivalent strength on the compression face only, remote face only, and both faces of the slab. The replacement has been done for higher strength and ductility. Substituted FRP re-bars are of (1) Aramid fiber-reinforced polymer (AFRP), (2) Basalt fiber-reinforced polymer (BFRP), (3) Carbon fiber-reinforced polymer (CFRP), and (4) Glass fiber-reinforced polymer (GFRP). The results are also compared with those obtained with a 50% replacement of the steel re-bars by the FRP re-bars.

Numerical Study and Theoretical Analysis on Blast Resistance of Fabricated Concrete Slab

Numerical Simulation of Blast Loads and Dynamic Response of Reinforced Concrete Slab Subjected to Close-in Explosion

Analysis of the Dynamic Response in Blast-Loaded CFRP-Strengthened Metallic Beams

Numerical simulation of blast resistance of reinforced concrete slabs under fire conditions

PREDICTION OF DEBRIS LAUNCH VELOCITY OF REINFORCED CONCRETE SLAB SUBJECTED TO INTERNAL BLAST LOADING

Blast behaviors of precast concrete sandwich EPS panels: FEM and theoretical analysis

Evaluating concrete material models for blast analysis using 3D finite element analysis

Investigation on Anti-Explosion Performance of Reinforced Concrete Slab with Composite Protective Aluminum Foam

Damage Mechanism Of Reinforced Concrete Slab Under Internal Blast Loading

Blast resistance of concrete slab reinforced with high performance fibre material

Experimental and Numerical Investigations on Ultra-High Toughness Cementitious Composite Slabs Subjected to Close-in Blast Loadings

Validation study on numerical simulation of RC response to close-in blast with a fully coupled model

Numerical analysis of prestressed reinforced concrete beam subjected to blast loading

Experimental Investigation and Numerical Simulation on the Blast Resistance of Reactive Powder Concrete Subjected to Blast by Embedded Explosive

Experiment and Numerical Investigations of Ultra-High Toughness Cementitious Composite Slabs under Contact Explosions

Performance of One-way Composite Reinforced Concrete Slabs under Explosive-induced Blast Loading

Numerical analysis of reinforced concrete buildings subjected to blast load

Numerical Simulation on Failure Process of Prestressed Concrete Structures under Impact Load

Strength prediction and stochastic analysis of ultra-high performance concrete columns under the explosive blast load

Experimental and Numerical Study of Non-Explosive Simulated Blast Loading on Reinforced Concrete Slabs

Damage assessment of prefabricated prestressed channel slab under plane charge blast