Abstract:Under the influence of wind and horizontal seismic forces, structures such as piers in curved beam bridges, main arches of steel tube concrete arch bridges, and frame columns may experience combined bending‐torsion stress states, affecting the safe usage of the structure. To investigate the mechanical performance of circular concrete‐filled steel tube(CFST) columns under bending‐torsional coupling, a three‐dimensional solid‐shell finite element model of circular concrete‐filled steel tube columns under various bending and torsion ratios (k) was established using ABAQUS software, and validated with existing experiments on such columns under bending‐torsional loading. Parametric analysis was conducted to explore the trends of interface slip and the restraining effect in circular concrete‐filled steel tube columns under different bending and torsion ratios, analyzing the impact of parameters such as the yield strength of steel, concrete strength, steel content in the cross‐section, and shear–span ratio on the combined bearing capacity. The results of the parametric analysis show that: (1) with the increase of k, the relative slip at the interface between the core concrete and the outer steel tube first increases and then decreases, with interface slip leading to a reduction in the load‐bearing capacity; (2) the relative slip at the interface between the core concrete and the outer steel tube first increases and then decreases, with interface slip leading to a reduction in the load‐bearing capacity; (3) with the increase of k, the circumferential and axial stresses in the steel tube surface of the circular concrete‐filled steel tube columns increase, while the shear stress decreases, leading to a transition in the failure mode of the columns from combined bending‐torsional failure to bending‐shear failure. Based on these findings, a practical calculation formula for the bending‐torsional combined bearing capacity of circular concrete‐filled steel tube columns is proposed, offering high calculation accuracy and serving as a reference for the design of such components.

Parametric Study on the Structural Behavior and Failure Mechanism of Skewed Inverted-T Bent Caps

Case Study on Stability Performance of Asymmetric Steel Arch Bridge with Inclined Arch Ribs

Static Shear Performance and Residual Axial Capacity of Rectangular RC Bridge Piers under Near-Ground Lateral Loads

Parametric Study of In-Plane Ultimate Bearing Capacity of CFST Truss Rib Arch Bridge

Quasi-static Testing and Networked Pseudo-Dynamic Testing on Fiber Reinforced Plastic Retrofitted Reinforcement Concrete Short Columns of Bridge

Strut-And-Tie Model Research On Bridge Column-Pile-Footing

Triaxial Hybrid Simulation and Cyclic Tests of Full-Scale Circular Steel Tube Columns

Mechanism Analysis and Design of Novel Tapered Iron Bolt Shear Connectors

Study Of Flexural Response In Strain Hardening Cementitious Composites Based On Proposed Parametric Model

Experimental and Numerical Studies of Hysteretic Response of Triple-Truss-confined Buckling-Restrained Braces

Numerical Modeling of Shear Behavior of Reinforced Concrete Pile Caps

Theoretical study on the nonlinear performance of single-box multi-cell composite box-girder with corrugated steel webs under pure torsion

Parametric study on the I-shape brace connection of conventional concentrically braced frames

Analysis of The Working Performance of Large Curvature Prestressed Concrete Box Girder Bridges

Bending Capacity of Steel-Concrete-Steel Composite Structures Considering Local Buckling and Casting Imperfection

Buckling optimization of curvilinear fiber-reinforced composite structures using a parametric level set method

Research on the mechanical performance of circular concrete‐filled steel tube columns under bending‐torsional coupling

Experimental study on the seismic performance of a curved bridge via large-scale hybrid tests

Parametric study on the structural performance of ordinary, bamboo-shaped and triple-truss confined all-steel BRBs with a circular core cross-section

Numerical Simulation Analysis of the Bending Performance of T-Beams Strengthened with Ultra-High-Performance Concrete Based on the CDP Model

Investigation on mechanical performance of prestressed concrete box‐girder bridge strengthened using composite trusses with different shapes