Abstract:Parametric interpolation for Non-Uniform Rational B-Spline (NURBS) curve has become more important than ever before in the control of CNC machine tools. An effective NURBS interpolator not only can obtain accurate contour trajectories, but also have smooth dynamics performance. This paper proposes a numerically efficient NURBS interpolation scheme which consists of two stages namely preprocessing and interpolating. In the stage of pre-processing, the parameter interval is split into several blocks at breakpoints and an iterative numerical quadrature method is applied for each block. By means of the iterative quadrature method, the initial parameter intervals of each block are divided into several subintervals according to the arc length approximation error. Meanwhile, the curvature of each knot and the cubic polynomial coefficients of each subinterval are obtained. Then the critical points with large curvature of each block are found from the candidate points and the tolerated speed of each critical point is calculated according to the constraints of chord error and centripetal acceleration. Hence, the feedrate scheduling based on the S-shaped acceleration profile for each block can be preplanned via the approximate arc length of each subinterval, the tolerated speed of each critical point and kinematics characteristics such as acceleration/deceleration and jerk limits of the machine tools. In the stage of interpolating, the parameter of the next interpolation point can be calculated directly using the cumulative arc length and the cubic polynomial coefficients of each subinterval. Finally, a series of numerical simulations and real machining experiments are conducted, and the simulation and experimental results have showed the good performance of the proposed NURBS interpolator both in efficiency and accuracy.

An adaptive real-time NURBS curve interpolation for 4-axis polishing machine tool

A Real-Time Dual NURBS Interpolator with Optimised Control of Flexible Acceleration and Deceleration for Five-Axis CNC Machining

A Feedrate Planning Method for the NURBS Curve in CNC Machining Based on the Critical Constraint Curve

Development and Implementation of a NURBS Interpolator with Smooth Feedrate Scheduling for CNC Machine Tools

An accurate NURBS curve interpolation algorithm with short spline interpolation capacity

Curvature-Based Real-Time NURBS Surface Interpolator with Look-Ahead ACC/DEC Control.

Smooth Non-Uniform Rational B-spline (NURBS) Machining with Kinematic Limit for Short Linear Segments

NURBS Curve Interpolation Algorithm Adaptive to the Machine's Kinetic Characteristics

Adaptive Parametric Interpolation Scheme with Limited Acceleration and Jerk Values for NC Machining

The Research of Dual NURBS Curves Interpolation Algorithm for High-Speed Five-Axis Machining

The realization of NURBS interpolator for free-form surfaces machining

Implementation of an adaptive feed speed 3D NURBS interpolation algorithm

Axial self-adaptability based curve interpolation algorithm

An Adaptive Feedrate Scheduling Method of Dual Nurbs Curve Interpolator for Precision Five-Axis Cnc Machining

Study on NURBS curve interpolation and relative algorithms in CNC system

A new adaptive interpolation scheme of NURBS based on axis dynamics

A Look-Ahead and Adaptive Speed Control Algorithm for Parametric Interpolation

Research and Implementation of NURBS Interpolation Algorithm for Adaptive Feed Speed

Real-Time B-Spline Interpolator with Look-Ahead Scheme for High-Speed CNC Machine Tools

Research of Cubic Bezier Curve NC Interpolation Signal Generator

A Real-time NURBS Surface Interpolator for 5-Axis Surface Machining