Abstract:We propose a hierarchical multiscale modeling approach to simulate the hydro-mechanical coupling behavior in saturated high-porosity sandstone, with a particular focus on the occurrence and transition of compaction bands. In this multiscale approach, we use the finite element method (FEM) to solve the global boundary value problem for a sandstone, and the discrete element method (DEM) to solve the local representative volume elements (RVEs) embedded at the Gauss integration points of the FE mesh to provide the effective material constitutive responses required for FEM. The global governing equations for a coupled hydro-mechanical problem are solved with the standard u–p formulation, where the total stress is decomposed into the pore pressure and the effective stress which is directly derivable from the DEM solution of the RVEs, according to the seminal Terzaghi's effective stress principle. By choosing proper RVEs to represent the typical microstructure of high-porosity sandstone, we perform both drained and undrained simulations on saturated sandstone specimens to examine localized compactive failures developed therein. We identify that both mean effective stress and porosity control critically the initiation and development of failure modes in sandstone. Under undrained shear, our simulations show that a sandstone specimen may first develop a compaction band followed by a gradual transition to a shear-enhanced compaction band and even shear band, with the build-up of excessive pore pressure and hence drop of mean effective stress. In the specimen, regions experiencing localized volumetric contraction show relatively higher pore pressure than other regions and act as the source of flux flow. The Darcy flux peaks during the formation of compaction band and decreases gradually in the following stages. To distinguish the different failure stages with distinct physical attributes, the ratio of deviatoric strain to volumetric strain is adopted as a useful indicator signifying the underlying microstructural mechanisms for different deformation bands. This study signifies the importance of considering pore pressure and mean effective stress in fluid-involved engineering operations, e.g. aquifer management, hydrocarbon extraction and CO2 geological sequestration.

Application of a state-dependent sand model in simulating the cone penetration tests

Large Deformation Analysis of Intermittent Pile Penetration into Dense Sand Incorporating a State Dependent Mohr–Coulomb Model

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Large-Deformation Finite-Element Simulation of Deformation and Strain Fields Resulting from Closed-End Displacement Pile Installation in Sand

Multiscale Modeling and Analysis of Compaction Bands in High-Porosity Sandstones

DEM Study of the Stress Fields Around the Closed-Ended Displacement Pile Driven in Sand

A Multiscale Investigation of Strain Localization in Cohesionless Sand

MPM Modeling of Pile Installation in Sand: Contact Improvement and Quantitative Analysis

J2-deformation-type Soil Model Coupled with State-Dependent Dilatancy and Fabric Evolution: Multiaxial Formulation and FEM Implementation

Large Deformation Finite-Element Simulation of Displacement-Pile Installation Experiments in Sand

Theoretical Breakage Mechanics and Experimental Assessment of Stresses Surrounding Piles Penetrating into Dense Silica Sand

Constitutive Modeling of Physical Properties of Coastal Sand During Tunneling Construction Disturbance

Analytical analysis of spherical cavity expansion considering particle breakage effect of sand and its application for CPT tests

Micromechanics-based multimechanism bounding surface model for sands

A State-Dependent Multi-Mechanism Model for Sands

A unified monotonic model for sand based on modified hyperbolic equation and state-dependent dilatancy

Material point method simulations of displacement pile and CPT penetration in sand considering the effects of grain breakage

Numerical simulation of cone penetration test by using CFD–DEM coupled analysis

Three-dimensional multi-mechanism bounding surface model for sands

Numerical simulation of undrained cyclic triaxial tests of Nanjing flake-shaped fine sand

A Unified Plasticity Model for Large Post-Liquefaction Shear Deformation of Sand and Its Numerical Implementation