Abstract:WC-Ni composite coatings were fabricated on Ti-6Al-4V alloy substrates by laser cladding under high frequency micro-vibration. The microstructure, phase composition, microhardness and wear resistance of the cladding coatings were investigated by X-ray diffractometer (XRD), scanning electron microscope (SEM), energy disperse spectroscope (EDS), microhardness tester and friction and wear testing apparatus, respectively. The high frequency micro-vibration produced by a vibration exciter system made of magnetostrictive materials was used to assist laser cladding of nickel composite coatings. The effects of high frequency micro-vibration on the microstructure and properties of the cladding coatings are investigated. The results showed that high frequency microvibration promoted the formation of W2C and (Ti, W) C during the laser cladding process. Alloying carbide with rich tungsten is uniformly distributed in eutectic (Ti) Ni solid solution under the vibration frequency of 556 Hz, with some new W2C phases generated in the composite coating. In addition, at the bonding interface, the number of coarse dendrites is continuously reduced and that of fine grains is gradually increased. Appropriate increase of vibration frequency contributes to the refinement of the grains. The vibration makes the coating microstructure more uniform, which helps to reduce the microhardness fluctuation in the cladding coating. With the help of the fine-grained hard phase, the microhardness of the cladding coating is enhanced by the vibration. By choosing appropriate vibration parameters, high frequency micro-vibration helps to decrease the friction coefficient and wear loss of the composite coating.

Al 2 O 3 /TiO 2 -Ni-WC Composite Coatings Designed for Enhanced Wear Performance by Laser Cladding Under High-Frequency Micro-Vibration

Effect of Process Parameters on Microstructure and Properties of AlCoCrFeNi-WC-WS2 Composite Coating Prepared by Laser Cladding

Microstructure and Wear Behaviors of WC-Ni Coatings Fabricated by Laser Cladding under High Frequency Micro-Vibration

Microstructure evolution and tribological behavior of laser cladded Al 1.8 CrCuFeNi 2 /WC composite coatings on Ti-6Al-4 V

Effect of WC Addition on Microstructure and Tribological Properties of Bimodal Aluminum Composite Coatings Fabricated by Laser Surface Alloying

Microstructure and Mechanical Properties of FeCoCrNiAl + WC Composite Coating Formed by Laser Cladding on H13

Study Of Wear And Corrosion Resistances Of Ni60-Wc + Tic Composite Coating

Microstructure and Tribological Behavior of Laser Cladding TiAlSi Composite Coatings Reinforced by Alumina–titania Ceramics on Ti–6Al–4V Alloys

Microstructure and Wear Resistance of Ti6Al4V Titanium Alloy Laser-Clad Ni60/WC Composite Coating

Microstructure and Properties of WC Reinforced Ni-based Composite Coatings with Y2O3 Addition on Titanium Alloy by Laser Cladding

Research on microstructure, mechanical property and wear mechanism of AlCoCrFeNi/WC composite coating fabricated by HVOF

Study of Microstructure and Properties of Laser Cladding Ni60-WC + TiC Composite Coating

Microstructure and wear resistance of laser cladding FeNiCrMo-WC composite coating

Wear performance of FeCuMoTiV high entropy alloy coatings by laser cladding

Tribological Performance and Wear Mechanism of Laser Cladded NiCrAl-WC Coatings at High-Temperature

Microstructure and High-Temperature Tribological Properties of Laser-Cladded WC10Co4Cr–xTi2AlC Coatings

Research of Ni/WC Composite Coatings on TC4 titanium Alloy by Laser Cladding

Microstructural Evolution and Abrasive Resistance of WC7Co Ceramic Particle-Reinforced Ti6Al4V Composite Coating Prepared by Pulse Laser Cladding

Development and Characterization of Laser Clad High Temperature Self-Lubricating Wear Resistant Composite Coatings on Ti–6Al–4V Alloy

Wear Behaviors of TiN/WS2 + hBN/NiCrBSi Self-Lubricating Composite Coatings on TC4 Alloy by Laser Cladding

Microstructure and property of Ni/WC/La2O3 coatings by ultrasonic vibration-assisted laser cladding treatment