Abstract:Water addition to aviation kerosene draws increasing attention in increasing heat sink and suppressing coke formation for regenerative cooling of scramjet engines. However, the effect of water on flow, reaction and heat transfer, particularly the thermal inhomogeneity in curved cooling channel is rarely reported. In the present study, the effect of water on coking and heat transfer inhomogeneity characteristics of China aviation kerosene, RP-3 studied in a uniformly heated curved mini-channel. A transient three-dimensional numerical simulation model with hybrid pyrolysis and steam reforming reactions of RP-3 is established and validated. The results show that there exists serious mass and thermal stratification in the curved mini-channel due to secondary flow and species diffusion. Specifically, RP-3 and water are diffused to concentrate at the bottom heating wall surface while coke deposition and light gaseous species, e.g., H 2 , CH 4 , CO are concentrated at the top heating wall surface. The thermal difference between the top and bottom heating walls is significant. Temperature and coke content of the top heating wall are much higher than those of the bottom heating wall. The gas film and coke deposition formed at the top heating wall surface lead to serious heat transfer deterioration. Therefore, the heat transfer coefficient at the bottom wall of the curved channel is much higher than that of the top wall. Water addition enhances secondary flow and thus exacerbates the coking and heat transfer inhomogeneity in the curved cooling channel. With water content increasing from 0 to 15 wt%, the secondary flow velocity increases by 288.2%, the conversion of RP-3 increases by 114.8% and the average coke content on the heating walls decreases by 40%. Meanwhile, the average heat transfer coefficient increases by 33.9% at the bottom heating wall but decreases by 18.0% at the top heating wall with the increase of water content.

Flow and Mass Transfer of Pyrolytic Aviation Kerosene in Curved Channel

Numerical Study of Fluid Flows and Heat Transfer of Aviation Kerosene with Consideration of Fuel Pyrolysis and Surface Coking at Supercritical Pressures

Numerical Study on Flow and Heat Transfer of Supercritical Hydrocarbon Fuel in Curved Cooling Channel

Buoyancy Effect on Heat Transfer and Surface Coking of Hydrocarbon Fuel in Horizontal Square Channel at Supercritical Pressures

Numerical investigation of pyrolysis and surface coking of hydrocarbon fuel in the regenerative cooling channel

Modeling and Simulation of Supercritical-Pressure Turbulent Heat Transfer of Aviation Kerosene with Detailed Pyrolytic Chemical Reactions

Conjugate Heat Transfer, Endothermic Fuel Pyrolysis and Surface Coking of Aviation Kerosene in Ribbed Tube at Supercritical Pressure

Large Eddy Simulations of Heat Transfer and Thermal Oxidative Coking of Aviation Kerosene in Vertical U-Tube at a Supercritical Pressure

Asymmetric Heating and Buoyancy Effects on Heat Transfer of Hydrocarbon Fuel in a Horizontal Square Channel at Supercritical Pressures

Effect of pyrolytic reaction of supercritical aviation kerosene RP-3 on heat and mass transfer in the near-wall region

Model Validation and Parametric Study of Fluid Flows and Heat Transfer of Aviation Kerosene with Endothermic Pyrolysis at Supercritical Pressure

Experimental Investigation on the Flow and Heat Transfer Characteristics of Aviation Kerosene RP-3 During Thermal Pyrolysis Coking

The effect of water on coking and heat transfer inhomogeneity of supercritical aviation kerosene in a curved mini-channel

Computational Study of Heat Exchange and Thermal Oxidative Coking of Supercritical-Pressure Kerosene with Compressed Air in Counterflows

Effect of Geometry Parameters on the Hydrocarbon Fuel Flow Rate Distribution in Pyrolysis Zone of SCRamjet Cooling Channels

Enhanced flow and heat transfer of aviation kerosene in porous media microchannels

Controlling the rule of coke depositions of hydrocarbon fuels in channel to intensify heat transfer under supercritical conditions

Numerical Investigation of the Thermal-Mechanical Behaviors in the Regenerative Cooling Channel Considering Thermal Pyrolysis

Dynamic Characteristics of Hydrocarbon Fuel Within the Channel at Supercritical and Pyrolysis Condition

Numerical Simulation of Supercritical Catalytic Steam Reforming of Aviation Kerosene Coupling with Coking and Heat Transfer in Mini-Channel

Heat transfer performance of RP-3 aviation kerosene at supercritical pressure within a rotating U-shaped channel