Abstract:As one of the infiltration-based low-impact development (LID) measures, infiltration trenches are widely used to reduce runoff and improve water quality. The conventional analytical stochastic approach developed for use in the hydrologic design of infiltration trenches often overestimates the trench's runoff reduction performance when the infiltration rate at the bottom of the trench exceeds some high level or when the size of the trench is smaller than some threshold level. Furthermore, the appropriateness of using kernel density estimation (KDE) for rainfall event separation and frequency analysis has not been examined yet in the actual hydrologic design of LIDs. To overcome these deficiencies, an improved analytical stochastic model (ASM) was developed in this study incorporating the KDE-based rainfall event characterization and a modified formula for estimating the effective storage capacity of trenches. The calibration, verification and application of the improved ASM were systematically presented and their results were discussed. The accuracy of the improved ASM were verified by comparing the analytical results against the corresponding continuous simulation results. A large number of design cases in nine provincial capital cities of China were analyzed using the improved ASM and considering the effects of soil types, trench's storage reservoir depth, area ratio, and climate conditions. The improved ASM of infiltration trenches is useful for quickly and accurately assessing their water quantity control performances. The results indicated that the accuracy of improved ASM improved by up to 71 % in terms of R-square among the 9 study areas compared to conventional ASM. The improved ASM can be used to directly and quickly calculate the useful hydrologic performance indices for a given trench size, soil condition, area ratio and local climate condition, it can thus provide scientific guidance for the Sponge City construction in China and sustainable urban stormwater management.

Infiltration Analysis of Perforated Storm Sewer: Finite Difference Modelling Versus Field Tests

Physical and Numerical Modelling of Infiltration from Drainage Holes for Perforated Storm Sewer

Quantitative Methods for Groundwater Infiltration into Sewer System

An Approximate Model on Three-Dimensional Groundwater Infiltration in Sewer Systems.

An Approximate Solution for Two-Dimensional Groundwater Infiltration in Sewer Systems

Modeling Soil Loss By Water Infiltration Through Sewer Pipe Defects

Proper Sizing of Infiltration Trenches Using Closed-Form Analytical Equations

A Three-Dimensional Numerical Method for Siphon Drainage Process Simulation

Towards the Cost-Effective Design of Stormwater Infiltration Trenches: a Hybrid Model Integrating Cost-Benefit Analysis and an Analytical Stochastic Approach

Three-Dimensional Numerical Simulation Research on Discharge Characteristics of Storm-Drain Inlet in Low-Lying Areas

A Novel SWMM Based Algorithm Application to Storm Sewer Network Design

Urban Drainage Efficiency Evaluation and Flood Simulation Using Integrated SWMM and Terrain Structural Analysis.

Swmm Simulation of the Storm Water Volume Control Performance of Permeable Pavement Systems

Towards cost-effective design of stormwater infiltration trenches: A hybrid model integrating cost-benefit analysis and an analytical stochastic approach

Modelling urban flooding integrated with flow and sediment transport in drainage networks

Numerical Analysis of 1D Coupled Infiltration and Deformation in Layered Unsaturated Porous Medium

Rapid quantification of the surface overflow and underground infiltration in sewer pipes based on computer vision and continuous optimization

The improved analytical stochastic model of infiltration trenches for stormwater quantity control

A two-dimensional hydrodynamic urban flood model based on equivalent drainage of manholes

Enhancing Road Drainage Systems for Extreme Storms: Integration of a High-Precision Flow Diversion Module into SWMM Code

Numerical investigation of the seepage mechanism and characteristics of soil-structure interface by CFD-DEM coupling method