Abstract:The main challenges of a solar steam generation device based on biomass materials are complicated processing techniques and relatively low efficiency. To solve these problems, we reported a simple immersion treatment method by depositing polydopamine (PDA) and silver nanoparticles (AgNPs) on natural wood to prepare a novel solar interface evaporation device. exhibits a unique bilayer structure. The absorbance of the top light absorption layer is higher than 96% in a wide wavelength range (300–2500 nm). Owing to the synergistic photothermal effect between PDA and AgNPs, has ultrafast solar–thermal response (a temperature increase of 42.5 °C within 5 min under 1 sun), and more heat is located at the steam generation interface (the surface temperature is 45.1 °C). The natural wood layer at the bottom with low thermal conductivity provides sufficient water supply and reduces the bulk heat loss. A high evaporation rate of 1.58 kg m–2 h–1 is achieved using under 1 sun (1 kW m–2). Its evaporation efficiency reaches 88.6%. The results upon sewage treatment and seawater desalination indicate that has an excellent purification ability and self-desalting capacity. More importantly, when compared to traditional solar evaporators, exhibits high antibacterial activity. The result of this antibacterial experiment shows that this material almost completely kills harmful bacteria. Therefore, has a high application potential in seawater desalination and sewage purification, providing a significant incentive to solve the problem of insufficient freshwater supply.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c14068?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c14068</a>.Photographs of the preparation process of and ; photograph of cut out and SEM images of cut out under different magnifications; XPS results of samples; thermal conductivity results of dry wood, dry , wet wood, and wet ; adsorption dye solution test results of ; photographs of steam generation of ; evaporation rate of the four systems in the dark conditions within 1 h; E. coli suspension cultured with different samples for 24 h; evaporation rate and efficiency of the sample within 24 working cycles; ATR-FTIR spectra of the sample after 24 working cycles; surface temperature IR mapping images of the evaporation system under different sun conditions; evaporation rate and efficiency of the seawater as a function of time under different sun conditions; top-view of during the desalination test within 24 h; comparison results of the evaporator and other evaporators; and steady-state energy balance analysis (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c14068/suppl_file/am0c14068_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Enhanced Solar Desalination by Delignified Wood Coated with Bimetallic Fe/Pd Nanoparticles

Boosting solar steam generation by photothermal enhanced polydopamine/wood composites

Fe3O4/polyvinyl alcohol decorated delignified wood evaporator for continuous solar steam generation

Wood-Based Solar Interface Evaporation Device with Self-Desalting and High Antibacterial Activity for Efficient Solar Steam Generation

High‐Entropy‐Alloy‐Nanoparticles Enabled Wood Evaporator for Efficient Photothermal Conversion and Sustainable Solar Desalination

Multi-Shelled Hollow Porous Carbon Nanospheres-Based Evaporator for Highly Efficient Solar-Driven Desalination

Processing Natural Wood into an Efficient and Durable Solar Steam Generation Device

Salt-Resistant Wood-Based Solar Steam Generator with Top-Down Water Supply for High-Yield and Long-Term Desalination of Seawater and Brine Water

High-performance bilayer solar evaporators constructed by candle-derived carbon nanoparticle/wood hybrid

Polydopamine/Fe3O4 modified wood-based evaporator for efficient and continuous water purification

An array structure of polydopamine/wood solar interfacial evaporator for high-efficiency water generation and desalination

Porous silicon modified wood as a high-efficiency solar steam generator

In situ polymerization of pyrrole on elastic wood for high efficiency seawater desalination and oily water purification

Enhanced solar interfacial evaporation through lignin-polyaniline composite coatings on Balsa wood substrates

Highly Efficient and Cost-Effective Water Desalination via the Hybrid Hydrogel-Based Solar-Driven Interfacial Evaporation

A Bilayered Wood-Poly(3,4-ethylenedioxythiophene):Polystyrene Sulfonate Hydrogel Interfacial Evaporator for Sustainable Solar-Driven Sewage Purification and Desalination

MOFs‐derived Carbon Materials Loading on PDA‐modified PU Foam for Interfacial Solar Steam Generation and Seawater Desalination

Fe2O3 Nanoparticles Deposited over Self-Floating Facial Sponge for Facile Interfacial Seawater Solar Desalination

Rational Design of High‐Performance Bilayer Solar Evaporator by Using Waste Polyester‐Derived Porous Carbon‐Coated Wood

Bilayer Designed Paper-Based Solar Evaporator for Efficient Seawater Desalination

Bi-doped VO2 coated onto wood as a highly efficient photoabsorber in interfacial solar steam generation