Abstract:The main challenges of a solar steam generation device based on biomass materials are complicated processing techniques and relatively low efficiency. To solve these problems, we reported a simple immersion treatment method by depositing polydopamine (PDA) and silver nanoparticles (AgNPs) on natural wood to prepare a novel solar interface evaporation device. exhibits a unique bilayer structure. The absorbance of the top light absorption layer is higher than 96% in a wide wavelength range (300–2500 nm). Owing to the synergistic photothermal effect between PDA and AgNPs, has ultrafast solar–thermal response (a temperature increase of 42.5 °C within 5 min under 1 sun), and more heat is located at the steam generation interface (the surface temperature is 45.1 °C). The natural wood layer at the bottom with low thermal conductivity provides sufficient water supply and reduces the bulk heat loss. A high evaporation rate of 1.58 kg m–2 h–1 is achieved using under 1 sun (1 kW m–2). Its evaporation efficiency reaches 88.6%. The results upon sewage treatment and seawater desalination indicate that has an excellent purification ability and self-desalting capacity. More importantly, when compared to traditional solar evaporators, exhibits high antibacterial activity. The result of this antibacterial experiment shows that this material almost completely kills harmful bacteria. Therefore, has a high application potential in seawater desalination and sewage purification, providing a significant incentive to solve the problem of insufficient freshwater supply.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c14068?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c14068</a>.Photographs of the preparation process of and ; photograph of cut out and SEM images of cut out under different magnifications; XPS results of samples; thermal conductivity results of dry wood, dry , wet wood, and wet ; adsorption dye solution test results of ; photographs of steam generation of ; evaporation rate of the four systems in the dark conditions within 1 h; E. coli suspension cultured with different samples for 24 h; evaporation rate and efficiency of the sample within 24 working cycles; ATR-FTIR spectra of the sample after 24 working cycles; surface temperature IR mapping images of the evaporation system under different sun conditions; evaporation rate and efficiency of the seawater as a function of time under different sun conditions; top-view of during the desalination test within 24 h; comparison results of the evaporator and other evaporators; and steady-state energy balance analysis (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c14068/suppl_file/am0c14068_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Bi-doped VO2 coated onto wood as a highly efficient photoabsorber in interfacial solar steam generation

<p>Interfacial solar steam generation by sawdust coated with W doped VO2</p>

Wood–Graphene Oxide Composite for Highly Efficient Solar Steam Generation and Desalination

Porous silicon modified wood as a high-efficiency solar steam generator

Boosting solar steam generation by photothermal enhanced polydopamine/wood composites

Bio-Derived Photothermal Materials and Evaporators for Sustainable Solar Energy-Driven Water Process

Combined effect of grooves and nanoflower structured Co3O4 coating on bamboo wood for highly efficient solar steam generation at indoor and outdoor conditions

Wood-Based Solar Interface Evaporation Device with Self-Desalting and High Antibacterial Activity for Efficient Solar Steam Generation

Hierarchical Porous Aluminophosphate-Treated Wood for High-Efficiency Solar Steam Generation

Enhanced Solar Desalination by Delignified Wood Coated with Bimetallic Fe/Pd Nanoparticles

Alkali treatment combined with surface carbonized wood for high-efficiency solar interfacial evaporation

Interfacial solar steam generation by wood-based devices to produce drinking water: a review

Processing Natural Wood into an Efficient and Durable Solar Steam Generation Device

Progress in interfacial solar steam generation using low-dimensional and biomass-derived materials

A low-cost carbonized Enteromorpha–coated wood for highly efficient solar-driven interfacial water evaporation

Clean Water Production by Non-Noble Metal/reduced Graphene Oxide Nanocomposite Coated on Wood: Scalable Interfacial Solar Steam Generation and Heavy Metal Sorption

3D wood-based evaporator for highly efficient solar steam generation

A Bilayered Wood-Poly(3,4-ethylenedioxythiophene):Polystyrene Sulfonate Hydrogel Interfacial Evaporator for Sustainable Solar-Driven Sewage Purification and Desalination

Self-Suspended Photothermal Microreactor for Water Desalination and Integrated Volatile Organic Compound Removal

Design and performance boost of a MOF-functionalized-wood solar evaporator through tuning the hydrogen-bonding interactions

Coating of Wood with Fe 2 O 3 -Decorated Carbon Nanotubes by One-Step Combustion for Efficient Solar Steam Generation