Abstract:Here, a current-accelerated phase cycling by an in situ current-induced oxidation process was demonstrated to reversibly switch the local metallic Cu and semiconducting Cu2O phases of patterned polycrystalline copper nanobelts. Once the Cu nanobelts were applied by a direct-current bias of ∼0.5 to 1 V in air with opposite polarities, the resistance between several hundred ohms and more than MΩ can be manipulated. In practice, the thickness of 60 nm with a moderate grain size inhibiting both electromigration and permanent oxidation is the optimized condition for reversible switching when the oxygen supply is sufficient. More than 40% of the copper localized beneath the positively biased electrode was oxidized assisted by the Joule heating, blocking the current flow. On the contrary, the reduction reaction of Cu2O was activated by the thermally assisted electromigration of Cu atoms penetrating the interlayer at the reverse bias. Finally, based on a high on/off ratio, the fast switching and the scalable production, reusable feasibility based on copper nanobelts such as the memristor array was demonstrated.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.0c09419?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.0c09419</a>.Endurance, stability, and retention test of Ni/Cu/Ni devices; nano-XANES based on fluorescence mode; simulated and fitted results of Cu K-edge XANES spectra; pseudo-operando SPEM results; linear-scale current–voltage relationship; experimental and fitted current–voltage relationship at reverse bias; current–voltage measurements and the SEM image of devices; dependence of current–voltage relationship on compliance current values; schematic procedure to reconstruct stoichiometric images based on the pseudo-operando nano-XANES mapping; pseudo-operando profile of oxidation in the device; pseudo-operando intensity mapping; data analysis procedure using EELS; vertical and pseudo-operando profile of oxidation in the device; dependence of device geometry on the switching (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.0c09419/suppl_file/nn0c09419_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

In Situ Transmission Electron Microscopy Study of Conductive Filament Formation in Copper Oxides

Formation of Multiple Conductive Filaments in the Cu/ZrO2:Cu/Pt Device

A Study of Copper Oxide Based Resistive Switching Memory by Conductive Atom Force Microscope

In-situ Impedance Spectroscopy on Copper Oxide Scales under Potential Controlled Oxidation at High Temperatures

Electric Field-Dependent Evolution Dynamics of Conductive Filaments in 2D Material-Based Planar Memristors

Probing Electrochemistry at the Nanoscale: in Situ TEM and STM Characterizations of Conducting Filaments in Memristive Devices

Defects-curated bipolar resistive switching and magnetism in CuxO films

In Situ Current-Accelerated Phase Cycling with Metallic and Semiconducting Switching in Copper Nanobelts at Room Temperature

In Situ TEM Investigation of Oxygen Migration As a Key Mechanism for Resistive Switching in Pr0.7Ca0.3MnO3

In Situ TEM Studies of Oxygen Vacancy Migration for Electrically Induced Resistance Change Effect in Cerium Oxides.

Evolution of Conductive Filament and Its Impact on Reliability Issues in Oxide-Electrolyte Based Resistive Random Access Memory

Distinguishing Oxygen Vacancy Electromigration and Conductive Filament Formation in TiO2 Resistance Switching Using Liquid Electrolyte Contacts.

Dynamic Processes of Resistive Switching in Metallic Filament-Based Organic Memory Devices

Evolution of the conductive filament system in HfO2-based memristors observed by direct atomic-scale imaging

Atomic View of Filament Growth in Electrochemical Memristive Elements

In SituStudy of Thermal Stability of Copper Oxide Nanowires at Anaerobic Environment

Multi-Stimuli Operando Transmission Electron Microscopy for Two-Terminal Oxide-Based Devices

Structural Analysis and Performance in a Dual‐Mechanism Conductive Filament Memristor

Oxide phase and conductivity-type of copper oxide thin films deposited by direct current magnetron sputtering

Characterization of Periodically Nanostructured Copper Filaments Self-Organized by Electrodeposition

On the origin of filamentary resistive switching in oxides-based memristive devices