Abstract:Energy flexible building is promising for the penetration of renewable energy, and electric heating floor with built-in ventilation duct is one important form. However, the thermal and energy performance of such thermal active system is still unclear, which makes it necessary to develop a reliable thermal model of such system. In this research, a scale experimental system was established to test the space heating performance and energy consumption characteristics of four ventilated mortar blocks under different operational modes, and three blocks were integrated with different distributions of micro-encapsulated phase change material (PCM). An analysis was conducted of the critical parameters including the surface temperature of mortar block, the average temperature of space air, the temperature of black globe and the power consumption. It was found out that when PCM was concentrated on the upper part, and ventilation started at the same time as heating, the heating power consumption was increased by up to 41.5% compared to the heating without ventilation. For a further predictive control, a simplified state space model was also established and validated by the experimental data. Additionally, the impact of some geometrical and operational parameters was also analysed based on the model, including the thickness of mortar block, the air speed and the diameter of tube. It was demonstrated that the thickness of block had the most significant impact on the surface temperature of mortar block, ventilation rate had a considerable impact on the thermal responsiveness of indoor air, and tube diameter had a comprehensive impact on the thermal performance of block and space air.

A Dynamic State-Space Model for Predicting the Thermal Performance of Ventilated Electric Heating Mortar Blocks Integrated with Phase Change Material

Experimental Investigation on the Effects of Phase Change Material and Different Ventilation Modes on the Thermal Storage, Space Heating and Energy Consumption Characteristics of Ventilated Mortar Blocks

Thermal storage and thermal management properties of a novel ventilated mortar block integrated with phase change material for floor heating: an experimental study

Numerical Simulation on the Thermal Performance of a PCM-containing Ventilation System with a Continuous Change in Inlet Air Temperature

A Semi-Analytical Model for Evaluating the Thermal Storage Capacity and Heat Use Efficiency of Flexible Thermal Storage Heating Floor

Numerical simulations on the thermal performance of ventilated walls with passive solar heating and latent heat storage in winter

A Semi-Dynamic Heat Transfer Model of Hollow Block Ventilated Wall for Thermal Performance Prediction

A parametric model on thermal evaluation of building envelopes containing phase change material

Performance analysis of a novel hybrid CdTe-PCM multi-layer ventilated window system for building application: An experimental and numerical study

Modeling and simulation on the thermal performance of shape-stabilized phase change material floor used in passive solar buildings

Investigation on heating performance of an integrated phase change material Trombe wall based on state space method

Numerical simulation and thermal performance of hybrid brick walls embedding a phase change material for passive building applications

Improving thermal performance of a passive ventilation and cooling system by integrating a phase-change material: Dynamic characteristics and parametric examinations

Study on the Demand Response Potential of an Actively Ventilated Building: Parametric and Scenario Analysis

Thermal performance of a building envelope including microencapsulated phase change materials (PCMs): A multiscale experimental and numerical investigation

Experimental assessment of concrete masonry units integrated with insulation and phase change material: A wall-pattern study

Thermal behavior analysis of hollow bricks filled with phase-change material (PCM)

Dynamic integration of phase change material in walls for enhancing building thermal performance—A novel self-adaptive method for moving PCM layer

Experimental Study of Under-Floor Electric Heating System with Shape-Stabilized PCM Plates

On-site Measurement of the Thermal Performance of a Novel Ventilated Thermal Storage Heating Floor in a Nearly Zero Energy Building

Model and simulation on thermal performance of shape-stabilized phase change material floor