Abstract:The nanomorphology of bulk heterojunction (BHJ) blends based on poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b′]dithiophene-2,6-diyl][3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl]] (PTB7) blended with [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) is systematically varied by using the volume fraction of the solvent additive 1,8-diiodooctane (DIO) from 0 to 20 vol % in chlorobenzene to prepare organic solar cells (OSCs). Blends prepared without DIO forms large phase-separated domains of PC71BM which are suppressed on addition of 3 vol % DIO, resulting in improved nanoscale features. Addition of 20 vol % DIO results in a finer interconnected morphology along with increased roughness due to polymer aggregation, which contrasts with previous reports. With increase in addition of DIO the photoluminescence (PL) from the blend is reduced; however, a relative increase in PL from 750 nm onward is observed for blends with 20 vol % DIO. As quenching of the blend PL is related to the donor/acceptor interface, structural characterizations in real-space (microscopy) and k-space (scattering) are performed to unravel the nanomorphology and correlate it with photophysical and charge transport processes. Electron-transport length scales measured by scanning photocurrent microscopy are found to increase with the addition of up to 3 vol % DIO associated with the breakup of the large PC71BM agglomerates, while the hole-transport length is found to increase on adding DIO up to 20 vol % due to aggregation of polymer chains. Hence, this work represents a unique set of results systematically examining the effect of nanomorphology on structural and solar cells properties of BHJ blends, which can have a direct implication on better understanding of the emerging high-efficiency OSC systems.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.0c02256?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.0c02256</a>.Energy level diagram and device architecture; illuminated J–V, dark J–V, EQE, AFM, TEM, R-SoXS, GIWAXS, NEXAFS, and PL for different additive concentrations in blend; knee voltage from dark J–V; methodology for calculating domain size from AFM and TEM; scanning photocurrent microscopy setup; hole-only and electron-only J–V plots; schematic of simulated device structure for FDTD simulations; absorbance for PTB7 film and solution for different DIO concentrations (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.0c02256/suppl_file/an0c02256_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Morphological Characterization of Polymer Blends: Impact of Side Chain Modification

MORPHOLOGIES AND PERFORMANCE OF ORGANIC SOLAR CELLS USING LOW POLYMERIZATION DEGREE ALTERNATING COPOLYMER

Evolution of Polymer Photovoltaic Performances from Subtle Chemical Structure Variations.

All-Polymer Solar Cells: Impact of the Length of the Branched Alkyl Side Chains on the Polymer Acceptors on the Interchain Packing and Electronic Properties in Amorphous Blends

Design, Application, and Morphology Study of a New Photovoltaic Polymer with Strong Aggregation in Solution State

Side Chain Influence on the Morphology and Photovoltaic Performance of 5-Fluoro-6-alkyloxybenzothiadiazole and Benzodithiophene Based Conjugated Polymers.

Improving Efficiency of Organic Solar Cells by Restricting the Rotation of Side Chain on Small Molecule Acceptor

Effect of alkyl side chains of twisted conjugated polymer donors on photovoltaic performance

Enhancement the photovoltaic performance of conjugated polymer based on simple head-to-head alkylthio side chains engineered bithiophene

Manipulating backbone structure to enhance low band gap polymer photovoltaic performance

Toward High Efficiency Polymer Solar Cells: Influence of Local Chemical Environment and Morphology

Influence of Processing Parameters and Molecular Weight on the Morphology and Properties of High‐Performance PffBT4T‐2OD:PC71BM Organic Solar Cells

Disentangling the impact of side chains and fluorine substituents of conjugated donor polymers on the performance of photovoltaic blends

Correlation of Nanomorphology with Structural and Spectroscopic Studies in Organic Solar Cells

Molecular Design and Morphology Control Towards Efficient Polymer Solar Cells Processed Using Non‐aromatic and Non‐chlorinated Solvents

A Facile Method to Fine-Tune Polymer Aggregation Properties and Blend Morphology of Polymer Solar Cells Using Donor Polymers with Randomly Distributed Alkyl Chains

Solvent‐Polarity‐Induced Active Layer Morphology Control in Crystalline Diketopyrrolopyrrole‐Based Low Band Gap Polymer Photovoltaics

Delicately Controlled Polymer Orientation for High-Performance Non-Fullerene Solar Cells with Halogen-Free Solvent Processing.

Engineering the Morphology Via Processing Additives in Multiple All-Polymer Solar Cells for Improved Performance

From Binary to Ternary Solvent: Morphology Fine-Tuning of D/A Blends in PDPP3T-based Polymer Solar Cells.