Abstract:Very-high-temperature gas-cooled reactors (VHTRs) are promising for efficient, zero-carbon hydrogen production. The intermediate heat exchanger (IHX) is a key piece of equipment for VHTR-coupled hydrogen production. Constrained by the limited space within the VHTR, the IHX must be efficient and compact. Besides, radioactive graphite dust deposition will reduce the performance and reliability of IHXs. Therefore, understanding the thermal-hydraulic and dust-deposition characteristics of IHX tube bundles is crucial for the design and safe operation of IHXs. This study uses the unsteady k - kl - ω model to simulate flow and heat transfer in IHX tube bundles. The discrete particle model combined with a deposition model is used to predict the movement and deposition behavior of graphite dust. The deposition model is achieved using user-defined functions. The model and code are first validated by empirical correlations and experimental results. The transient flow fields show that, in the in-line arrangement, unsteady and asymmetric periodic flow occurs with a period of about 0.047 s. The flow is steadier and more symmetric in the staggered arrangement due to the restriction of the main flow to the separation vortices. The maximum circumferential heat-transfer coefficient for inner tubes occurs at the impact point, where the central angle θ is about 60° and 0° for the in-line and staggered arrangement, respectively. The graphite-dust deposition rate decreases with increasing Reynolds number and particle size and the deposition mechanism is also analyzed in detail. With the current design conditions, the Nusselt number of the staggered arrangement increases by 27.90%–29.17% compared with the in-line arrangement, and the deposition rate decreases by 1.52%–3.15%. Furthermore, new correlations for Nusselt number and friction factor are developed for the thermal-hydraulic design of IHX tube bundles.

Design Calculation and Thermal-Hydraulic Analysis of 290 MW Intermediate Heat Exchanger for Pool-Type Sodium-Cooled Fast Reactor

Numerical Study on Hydrodynamics, Mixing and Heat Transfer of Highly Viscous Fluid in a Novel Shell-and-tube Heat Exchanger with X-type Baffles

Thermal Hydraulic Characteristics of Intermediate Heat Exchanger with Coaxial Bending Tubes in a Pool-Type Sodium-Cooled Fast Reactor

Numerical Simulation and Optimization of In-Vessel Primary Heat Exchangers of NHR200-II

A CFD-BASED OPTIMIZATION DESIGN OF FLOW DISTRIBUTION DEVICE IN THE LOWER PLENUM OF INTERMEDIATE HEAT EXCHANGER OF SFR

A CFD-based simulation of fluid flow and heat transfer in the Intermediate Heat Exchanger of sodium-cooled fast reactor

Experimental Study on Manufacturing Technology of Intermediate Heat Exchanger Tube-Tubesheet Joint in Sodium-Cooled Fast Reactor

The Numerical Simulation of the Flow Distribution and Flow-Induced Vibration Analysis for Intermediate Heat Exchanger in a Pool-Type Fast Breeder Reactor

Large-eddy Simulation of Turbulent Flow and Heat Transfer of Helically Corrugated Tubes in the Intermediate Heat Exchanger of a Very-High-temperature Gas-Cooled Reactor

Numerical Investigation on Thermal–hydraulic Characteristics of the Helically Corrugated Tube in Intermediate Heat Exchangers for Very-High-temperature Gas-Cooled Reactors

Numerical study of thermal-hydraulic and dust-deposition of tube bundles in an intermediate heat exchanger

Experimental Investigation on Heat Transfer Performance of C-shape Tube Immerged in a Water Pool

Flow pattern analysis and multi-objective optimization of helically corrugated tubes used in the intermediate heat exchanger for nuclear hydrogen production

CFD Investigation on Thermal Hydraulics of the Passive Residual Heat Removal Heat Exchanger (PRHR HX)

Numerical Investigation On The Heat Transfer Enhancement Behavior Outside Longitudinal Finned Tubes

Design and optimization of intermediate heat exchanger for lead-bismuth cooled fast reactor coupled with supercritical carbon dioxide Brayton cycle

CFD Simulation of Secondary Side Fluid Flow and Heat Transfer of the Passive Residual Heat Removal Heat Exchanger

Turbulent Flow Boundary Layer And Heat Transfer Characteristics For The Intermediate Heat-Exchanger Simulation Of A Vhtr

Hydraulic Analysis and Experiment of the 68 Ka HTS-CL Heat Exchanger Mockup

Study on Design Calculation of the Wound-Tube Heat Exchanger in Hydrogen Recovery System

Numerical simulation of AP1000 passive residual heat removal heat exchanger