Abstract:Abstract The sCO2-4-NPP european project aims to develop an innovative technology based on supercritical CO2 (sCO2) for heat removal to improve the safety of current and future nuclear power plants. The heat removal from the reactor core will be achieved with multiple highly compact self-propellant, self-launching, and self-sustaining cooling system modules, powered by a sCO2 Brayton cycle. Heat exchangers are one of the key components required for advanced Brayton cycles using supercritical CO2. Fives Cryo company, a brazed plates and fins heat exchangers manufacturer, with its expertise in thermal and hydraulic design and brazing fabrication is developing compact, and highly efficient stainless steel heat exchanger solution for sCO2 power cycles, thanks to their heat exchange capability with low pinch and high available flow sections. The aim of the development of this specific heat exchanger technology is to achieve an elevated degree of regeneration. For this matter, plates and fins heat exchanger is a very interesting solution to meet the desired thermal duty with low pressure drop leading to a reduction in size and capital cost. The enhancement of the mechanical integrity of plates and fins heat exchanger equipment would lead to compete with, and even outweigh, printed circuit heat exchangers technology, classically used for sCO2 Brayton cycles. sCO2 cycle conditions expose heat exchangers to severe conditions. Base material selection is essential, and for cost reasons, it is important to keep affordable heat-resistant austenitic stainless steel grades, much cheaper than a nickel-based alloy. Another advantage of high compactness of plates and fins heat exchangers is the diminution of the amount of material used in the heat exchanger manufacturing, decreasing even more its cost. The challenge here is to qualify stainless steel plates and fins heat exchangers mechanical resistance, at cycle operating conditions, and meet with pressure vessels codes and regulations according to nuclear requirements. One critical point in the development of the heat exchangers is the design of the fins. As secondary surface, they allow the maximization of heat transfer at low pressure drop. At the same time mechanical strength has to be guaranteed. To withstand high pressure, fins thickness has to be significant, which makes the implementation complicated. Efforts were dedicated to successfully obtain an optimal shape. Forming of fins was therefore improved compared to conventional techniques. Important work was undertaken to define industrial settings to flatten the top of the fins leading to a maximum contact between the brazing alloy and the fins. Consequently brazed joints quantity is minimized inducing a diminution of the presence of eutectic phase, which is structurally brittle and limits the mechanical strength of the construction. A metallurgical study brings other elements leading to the prevention of premature rupture of the brazed structure. The idea is to determine an optimized solidification path and to identify a temperature range and holding time where the brazed joint is almost free of eutectic phase during the assembly process in the vacuum furnace.

Design and optimization of intermediate heat exchanger for lead-bismuth cooled fast reactor coupled with supercritical carbon dioxide Brayton cycle

Segmented Design of Performance Enhancement for Large Plate Fin Heat Exchanger of Cryogenic Air Separation Unit

Experimental and Numerical Study on Thermal Hydraulic Performance of Trapezoidal Printed Circuit Heat Exchanger for Supercritical CO2 Brayton Cycle

Non-linear mapping and multi-objective optimization of leading flow structure in plate-fin heat exchanger

Thermal design of printed circuit heat exchanger used for lead-bismuth fast reactor

Design and optimization analysis of a new double-layer tube type heat exchanger for lead-bismuth reactors

Conceptual design and numerical assessment of compact heat exchanger for lead-based reactor

Numerical Simulation and Optimization of In-Vessel Primary Heat Exchangers of NHR200-II

Numerical Investigation of Thermal-hydraulics Characteristics of Cross-Flow Corrugated Plate Heat Exchanger for Lithium-cooled Space Nuclear Reactor

Fluid-Thermal-Mechanical Coupled Analysis and Optimized Design of Printed Circuit Heat Exchanger with Airfoil Fins of S-CO2 Brayton Cycle

Design Optimization of Plate-Fin Heat Exchanger in a Gas Turbine and Supercritical Carbon Dioxide Combined Cycle with Thermal Oil Loop

Study on coupled heat transfer model and enhanced heat transfer law of liquid metals and supercritical fluids

Numerical investigation on thermal-hydraulic performance of variable cross section printed circuit heat exchanger

Study on the prediction and optimization of flow mal-distribution in printed circuit heat exchangers based on machine learning

Optimization-Inspired Pin-Fin Array for Supercritical Carbon Dioxide Recuperator

Multi‐objective optimization of thermoeconomic and component size of supercritical carbon dioxide recompression cycle based on small‐scale lead‐cooled fast reactor

Industrial Technical Development and Qualification of Highly Efficient Stainless Steel Plates and Fins Heat Exchanger for Heat Removal Supercritical CO2 Brayton Cycle Applied to Nuclear Power Plants

Assessment of flow and heat transfer of triply periodic minimal surface based heat exchangers

Thermal hydraulic assessment on the full banana model of COOL blanket for CFETR

The Coupled Process-Component Modeling and Optimization for Heat Exchanger of Supercritical CO2 with Property Variation Based on Heat Current Method

Design and optimization of a new heterogeneous printed circuit plate heat exchanger with molten salt zigzag passage and supercritical CO2 airfoil fin passage