Abstract:The symmetry breaking that is induced by initial imperfection (e.g., geometry or material inhomogeneity and out-of-plane disturbance) is a necessary condition for film buckling. However, the effect of initial imperfection on the buckling behavior is still not clear cut. Herein, given an elastic substrate-free circular film subjected to in-plane compressive stress and arbitrary initial imperfection, evolution of the deflection morphology is numerically studied and theoretically analyzed. Specifically, a two-dimensional spatial spectrum analysis is adopted to acquire the deflection morphology's dominant wavelength, which is combined with the maximum absolute deflection to characterize the deflection patterns. Before the so-called critical instability, the film under compression is found to go through a transition stage. Overall, the deflection increment in this stage is negligible except approaching the critical state. However, the dominant wavelength is found to be continuously growing (or decreasing) rather than suddenly appears upon reaching the so-called critical state, and, interestingly, such growth is found to be independent of the intensity and pattern of the initial imperfection if the same initial dominant wavelength is guaranteed. In the discussion, for both the transition and buckling stages, evolution laws of the deflection amplitude and wavelength are established analytically and found to agree well with the numerical results. This research clearly presents the actual evolution process of wrinkling morphology from linear in-plane deformation with small stable deflection to out-of-plane instability with large deflection, which deepens the cognition of instability behavior of films and provides a basis for related applications such as high-precision mechanical characterization.

Impact of Ridge Cracking on the Morphology of Buckle-Delamination

An analytical study on the morphology of buckle-delamination under large compression and boundary undulation

Effects of Ridge Cracking and Interface Sliding on Morphological Symmetry Breaking in Straight-Sided Blisters

Size Dependent Morphologies of Brittle Silicon Nitride Thin Films with Combined Buckling and Cracking

On the growth of buckle-delamination pattern in compressed anisotropic thin films

The Shape of Telephone Cord Blisters.

Nonlinear Analysis of Compressed Elastic Thin Films on Elastic Substrates: from Wrinkling to Buckle-Delamination

Effects of interface sliding on the formation of telephone cord buckles.

Tensile Progressive Damage and Compressive Postbuckling Analysis of Open-Hole Laminate Composites

Microcrack Initiation Behavior Around Film Cooling Holes in a Ni-based Single Crystal: in Situ Observation and Crystal Plastic Analysis

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Generation of Buckling and Wrinkling in Elastic Films: the Effect of Initial Imperfection.

Symmetry breaking and high-order instability of telephone cord buckles triggered by in-plane gradients of thin films

Post-buckling Evolution of Compressed Thin Films Adhered to Rigid Substrates

Buckle-driven Delamination of Thermal Barrier Coatings on a Polynomial Curved Substrate

Topography-driven Delamination of Thin Patch Adhered to Wrinkling Surface

Relationship Between Matrix Cracking and Delamination in CFRP Cross-Ply Laminates Subjected to Low Velocity Impact

Vibration and Buckling Characteristics of Cracked Natural Fiber Reinforced Composite Plates with Corner Point-Supports

Effect of matrix cracking on the time delayed buckling of viscoelastic laminated circular cylindrical shells

Discrete Dislocation Modeling on Interaction Between Type-I Blunt Crack and Cylindrical Void in Single Crystals

Compression-after-impact Effect on Postbuckling Behavior of Thermoplastic Composite Laminated Plates