Abstract:Nonlinear buckling of elastic thin films on compliant substrates is studied by modeling and simulations to reveal the roles of pre-strain, elastic modulus ratio, and interfacial properties in morphological transition from wrinkles to buckle-delamination blisters. The model integrates an interfacial cohesive zone model with the Föppl–von Kármán plate theory and Green function method within the general framework of energy minimization. A kinetics approach is developed for numerical simulations. Subject to a uniaxial pre-strain, the numerical simulations confirm the analytically predicted critical conditions for onset of wrinkling and wrinkle-induced delamination, with which a phase diagram is constructed. It is found that, with increasing pre-strain, the equilibrium configuration evolves from flat to wrinkles, to concomitant wrinkles and buckle-delamination, and to an array of parallel straight blisters. The height and width of the buckle-delamination blisters can be approximately described by a set of scaling laws with respect to the pre-strain and interfacial toughness. Subject to an equi-biaxial pre-strain, the critical conditions are determined numerically to construct a similar phase diagram for the buckling modes. Moreover, by varying the pre-strain, modulus ratio, and interfacial toughness, a rich variety of equilibrium configurations are simulated, including straight blisters, and network blisters with or without wrinkles. These results provide considerable insight into diverse surface patterns in layered material systems as a result of the mechanical interactions between the film and the substrate through their interface, which suggests potential control parameters for designing specific surface patterns.

An analytical study on the morphology of buckle-delamination under large compression and boundary undulation

Impact of Ridge Cracking on the Morphology of Buckle-Delamination

On the growth of buckle-delamination pattern in compressed anisotropic thin films

Nonlinear Analysis of Compressed Elastic Thin Films on Elastic Substrates: from Wrinkling to Buckle-Delamination

The Shape of Telephone Cord Blisters.

Symmetry breaking and high-order instability of telephone cord buckles triggered by in-plane gradients of thin films

Size Dependent Morphologies of Brittle Silicon Nitride Thin Films with Combined Buckling and Cracking

Effects of Ridge Cracking and Interface Sliding on Morphological Symmetry Breaking in Straight-Sided Blisters

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Finite Deformation Mechanics In Buckled Thin Films On Compliant Supports

Experimental Investigation of Spontaneous Buckling-Driven Delamination of Thin Films on Soft Spherical Substrate

Multiscale studies on the nonlinear vibration of delaminated composite laminates-global vibration mode with micro buckles on the interfaces

Analytical Study on the Buckling of Cylindrical Shells with Arbitrary Thickness Imperfections under Axial Compression

Effects of interface sliding on the formation of telephone cord buckles.

Stability diagram of unilateral buckling patterns of strip-delaminated films

A Simply Analytic Study of Buckled Thin Films on Compliant Substrates

High Order Perturbation Solution of Delamination Buckling

Buckling of a Stiff Thin Film on a Compliant Substrate in Large Deformation

Intricate Evolutions of Multiple-Period Post-Buckling Patterns in Bilayers

An asymptotic modeling and resolution framework for morphology evolutions of multiple-period post-buckling modes in bilayers

Finite Element Analysis of the Influence of Cohesive Law Parameters on the Multiple Delamination Behaviors of Composites under Compression