Abstract:The lateral bearing performance of a defective pile-supported wharf located on a slope was investigated through centrifuge modeling, and a numerical model was employed to back-analyze the centrifuge test data. The pile foundation system was composed of double-plumb, single-plumb, and batter piles, and the defects were located at the front row of the double-plumb piles. The failure mode, bearing lateral load, bent displacement, and pile bending moments were examined. The results show that overturning with slight torsion occurred in the bent under the lateral load. The piles clearly deformed around defects and were separated from the soil on the landside. The lateral bent displacement increased rapidly after a threshold lateral load value was reached. The bending moments were generally positive (i.e., the side facing the water was in tension) in the upper parts and negative in the lower parts of the double-plumb piles. The bending moments of the double-plumb pile heads increased with the lateral load, whereas the bending moments directly underneath the slope surface exhibited decreasing-constant tendencies with increasing lateral load. The bending moment of the single-plumb pile was generally positive above the slope surface and in compression below the slope surface, and decreasing-constant tendencies were observed with increasing lateral load just below the slope surface. The bending moment of the forward batter pile was negative and decreased with the lateral load around the slope surface and in the middle of the soil. The bending moment of the backward batter pile was generally positive above the slope surface, negative below the slope surface, and remained almost constant around the soil.

Analytical Study of Employing Low-Strain Lateral Pile Integrity Test on a Defective Extended Pile Shaft

Lateral Bearing Performance of a Defective Pile-Supported Wharf with Batter Piles

STUDY ON PILE LONGITUDINAL VIBRATION CONSIDERING EFFECT OF UNDERGROUND WATER LEVEL

Influence of Weld on Integrity Testing of Prestressed Pipe Piles

Multipoint Traveling Wave Decomposition Method and Its Application in Extended Pile Shaft Integrity Test

An Analytical Solution for Lateral Vibration of a Pile with Finite Length Pile in Viscoelastic Subgrade

Analytical Elastoplastic Solutions of Laterally Loaded Long Piles

3-D Numerical Simulation for Large-Diameter Cast-In-Situ Tubular Pile

Model Tests on Elevated Piles Subjected to Lateral Static and Impact Loading

3-D Numerical Simulation for Large-Diameter Cast-<i>In Situ</i> Tubular Pile

Lateral vibration characteristics of an extended pile shaft under low-strain integrity test

Model Tests on the Bearing Capacity of Precast Open-Ended Micro Pipe Piles in Soft Soil

Model tests on characteristics of ocean and offshore elevated piles with large lateral deflection

Elastoplastic Analytical Computation of Long Piles under Combined Lateral Loads

Field Tests of Offshore Driven Piles Subjected to Lateral Monotonic and Cyclic Loads in Soft Clay

Semi-analytical study of defective pile-beam systems under transient excitation: Implications for low-strain testing

Analytical Model for Laterally Loaded Soil-Extended Pile Shaft Applied to Verifying the Applicability of Lateral PS Method

A 3D analytical model for distributed low strain test and parallel seismic test of pipe piles

Vertical response analysis at multi-points on defective pile in layered soil and its application

Low Strain Quantitative Analysis of Pile Defects with Pile-Soil Interaction

Analysis method for pile groups subjected to lateral and torsional loads