Abstract:Aluminum(Al)/ammonium perchlorate(AP)/hydroxyl-terminated polybutadiene (HTPB) propellant is the most widely used propulsion system currently. Its ignition and combustion processes are fairly complex and need to be better understood. In this study, the thermal decomposition, ignition, and combustion properties of an Al/AP/HTPB propellant were investigated using a thermogravimetry–differential scanning calorimetry and a laser ignition testing system. The morphology and size distribution of the condensed combustion products (CCPs) were analyzed using a laser particle size analyzer and scanning electron microscopy. Results showed that the thermal decomposition process of the propellant consisted of three stages. The first stage (100–430 °C) was a major mass loss stage and exhibited typical features of AP decomposition. The second stage (430–630 °C) was mainly accompanied by the decomposition of remaining HTPB as well as slight oxidation of Al particles. In the third stage, further oxidation of Al particles resulted in a small mass increase. Due to the continuous emission problem, only a few combustion intermediates were identified in the combustion emission spectrum curves. The propellant combustion process could be roughly divided into three stages, and the flame development stage lasted longer than the flame decline stage. As the pressure increased, the propellant ignition delay time decreased and the burning rate increased significantly. The effect of pressure on ignition delay was more pronounced at low pressures. The CCPs consisted of three types. The oxidation of Al particles in the propellant followed the diffusion reaction mechanism. Agglomerates appeared in several different morphologies and had relatively low combustion efficiency under experimental conditions. A 2-D pocket-like structure was observed on the propellant surface.

Influence of humidity on the heat decomposition speed of single-base propellant

Study on the influence of moisture content on thermal stability of propellant.

Thermal Decomposition Characteristics of Double-base Propellant and Multi-nitrate Ester Propellant

Thermal decomposition and combustion characteristics of Al/AP/HTPB propellant

Effects of Thermal Damage on Impact Response Characteristics of High-Energy Propellants

Modified Arrhenius kinetics for double base propellant decomposition: effect of water

Effect of amine-based burning rate suppressants on the HTPB propellants: Thermal decomposition and combustion characteristics

Experimental Investigation on the Evaporation and Combustion Processes of Ammonium-Dinitramide-Based Liquid Propellant

Evolution of structural damage of solid composite propellants under slow heating and effect on combustion characteristics

Burning Characteristics in a Wide Range of Pressure and Thermal Decomposition of AP/PBT Solid Propellants

Analysis of thermal stability for slow burning propellant based on isothermal testing: Self‐accelerating decomposition temperature (SADT) calculation and validation

Study on Dynamic Impact and Ignition Response Behavior of GAP/PET/RDX Based Propellant

Reactive molecular dynamics study on the thermal decomposition reaction of a triple-base solid propellant

Crack propagation velocity and fracture toughness of hydroxyl-terminated polybutadiene propellants with consideration of a thermo-viscoelastic constitutive model: Experimental and numerical study

Effect of complex metal hydride on the thermal decomposition behavior of AP/HTPB-based aluminized solid rocket propellant

Study on the Effect of Potassium Compound on the Combustion Characteristics of HTPB Composite Solid Propellant

Dynamic Mechanical Response and Damage Mechanism of HTPB Propellant under Impact Loading

Experimental Investigation on the Influence of Confining Pressure on Thermal Aged CMDB Propellant

Numerical simulation of spontaneous combustion of propellant powder under restrictive conditions

Effect of the microporous structure of ammonium perchlorate on thermal behaviour and combustion characteristics

Synchronized measurement method of burning rate and combustion temperature of a solid propellant specimen