Abstract:Particle size and content of RDX are the two main factors that affect the burning stability of RDX-based propellants. However, these effects and the corresponding mechanisms are still controversial. In this work, we investigated the physicochemical processes during burning and the corresponding mechanisms through the technologies of structure compactness analysis on the base of voidage measurement and theoretical interfacial area estimation, apparent burning rate measurement using closed vessel (CV) and extinguished burning surface characterization relying on interrupted closed vessel (ICV) and scanning electron microscope (SEM). The results indicate that the voidage increased with the increase of RDX content and particle size due to the increasing interfacial area and increasing interface gap size, respectively. The apparent burning rate increased with the increase of RDX particle size because of the decreasing RDX specific surface area on the burning surface, which could decrease the heat absorbing rates of the melting and evaporation processes of RDX in the condensed phase. Similarly, the apparent burning rate decreased with the increase of RDX content at pressures lower than around 55 MPa due to the increasing RDX specific surface area. Whereas, an opposite trend could be observed at pressures higher than around 55 MPa, which was attributed to the increasing heat feedback from the gas phase as the result of the increasing propellant energy. For propellants containing very coarse RDX particles, such as 97.8 and 199.4 μm average size, the apparent burning rate increased stably with a flat extinguished surface at pressures lower than around 30 MPa, while increased sharply above around 30 MPa with the extinguished surface becoming more and more rugged as the pressure increased. In addition, the turning degree of <em>u</em>-<em>p</em> curve increased with the increase of coarse RDX content and particle size, and could be reduced by improving the structure compactness.

LTAIC bonding agent coated RDX to improve the mechanical properties of CMDB propellant

Molecular dynamics simulation of bonding role of cyclic borate ester in improving mechanical properties of the HTPB propellant

Preparation, High-Density Spherical, and Low Sensitivity of RDX/NC/PMMA Composite Particles

Preparation and Safety of Well-Dispersed RDX Particles Coated with Cured HTPB

Effect of polyol bonding agent on the mechanical properties of hydroxyl‐terminated block copolyether based composite propellant with low aluminum content

Synthesis of a Series of Dual-Functional Chelated Titanate Bonding Agents and Their Application Performances in Composite Solid Propellants

CPMD Investigations of the Improved Energetic Performance for Lithium Amidoborane Doped RDX

A new insight into the mechanical behavior of high-quality RDX in pressed polymer bonded explosives

Multi-scale modified nitramine crystals with conjugated structure intercalation and thin-layer catalyst coating for well-controlled energy release rate

Preparation, characterization, and investigation of thermal behavior of improved HMX and RDX through coating by TNT

Mechanical Properties and Thermal Decomposition Mechanism of Glycidyl Azide Polyol Energetic Thermoplastic Elastomer Binder with RDX Composite

Poly(aluminum chloride) shell-desensitized cyclotrimethylenetrinitramine explosive core

BUNDLES ON GENUS 2 CURVES AND TRIVECTORS

A Novel Method of Improving the Mechanical Properties of Propellant Using Energetic Thermoplastic Elastomers with Bonding Groups

Study on mechanical improvement of CL‐20 energetic co‐crystals based PBX by surface modification

Enhancing RDX Thermal Decomposition in Al@RDX Composites with Co Transition Metal Interfacial Layer

Effects of Sn-containing intermetallic compounds on the thermal decomposition and ignition properties of RDX and TKX-50

Preparation and Properties Study of Core-Shell CL-20/TATB Composites

Mechanochemical fabrication and properties of CL-20/RDX nano co/mixed crystals

The effect of Mg(BH4)2 on the energy characteristics of RDX based aluminized explosives

Effects of particle size and content of RDX on burning stability of RDX-based propellants