Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

ANALYTICAL BEHAVIOUR OF CFST CHORD TO HOLLOW TUBULAR BRACE TRUSS SUBJECTED TO BENDING

Analytical Behaviour of Cfst Chord to Chs Brace Truss under Flexural Loading

Flexural behaviour of concrete filled steel tubular (CFST) chord to hollow tubular brace truss: experiments

Seismic Behavior of Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns

Flexural Behaviour of Curved Concrete Filled Steel Tubular Trusses

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Parametric Study of In-Plane Ultimate Bearing Capacity of CFST Truss Rib Arch Bridge

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Analytical Behaviour of CFDST Chord to CHS Brace Composite K-joints

Trussed concrete-filled steel tubular hybrid structures subjected to axial compression: Performance and design calculation

Behaviour of CFDST chord to CHS brace composite K-joints: Experiments

Reliability-based Evaluation for Concrete-Filled Steel Tubular (CFST) Truss under Flexural Loading

Flexural Tests and Behavior of Multi-Celled Corrugated-Plate CFST Members

Trussed square concrete-filled steel tubular hybrid structures subjected to axial compression

Structural Behaviour and Reliability of CFST Trusses with Random Initial Imperfections

Study on In-Plane Behavior of Thin-walled Concrete-filled Steel Tubular Gusset Plate T-joints

Flexural behavior of concrete-filled rectangular steel tubular composite truss beams in the negative moment region

Analytical behavior of circular concrete-filled thin-walled steel tubes subjected to bending

Concrete-encased CFST Columns under Combined Compression and Torsion: Analytical Behaviour

Reliability calibration for the design of multiple-chord CFST trusses by advanced analysis

Flexural Performance of Concrete-Encased Concrete-Filled Steel Tubes