Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

Flexural Behaviour of Curved Concrete Filled Steel Tubular Trusses

Flexural behaviour of concrete filled steel tubular (CFST) chord to hollow tubular brace truss: experiments

Seismic Behavior of Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns

Flexural behavior of concrete-filled circular steel tubes under high-strain rate impact loading

Flexural strength analysis of non-post-tensioned and post-tensioned concrete-filled circular steel tubes

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Tests on Curved Concrete Filled Steel Tubular Members Subjected to Axial Compression

Flexural Tests and Behavior of Multi-Celled Corrugated-Plate CFST Members

Experimental Investigation and Design of Thin- Walled Concrete-Filled Steel Tubes Subject to Bending

ANALYTICAL BEHAVIOUR OF CFST CHORD TO HOLLOW TUBULAR BRACE TRUSS SUBJECTED TO BENDING

Experimental and Analytical Study of Hollow Section Concrete-Filled GFRP Tubes in Bending

Analytical Behaviour of Cfst Chord to Chs Brace Truss under Flexural Loading

Experimental Investigation And Design Of Concrete-Filled Cold-Formed Thin-Walled Steel Tubes Subject To Bending

Flexural Behavior of Circular Section Concrete-Filled Steel Tubes with Embedded Latticed Angles

Concrete-filled Steel Tubes with Reinforcing Bars or Angles under Axial Tension

Curved Concrete Filled Steel Tubular (ccfst) Built-Up Members under Axial Compression: Experiments

Combined Axial and Flexural Behavior of Concrete-Filled Corrugated Steel Tubular Columns

Experimental Behaviour of Reinforced Concrete-Filled Steel Tubes under Eccentric Tension

Concrete-Filled Steel and Steel Tubular T-Joints under Cyclic In-Plane Bending

Reliability-based Evaluation for Concrete-Filled Steel Tubular (CFST) Truss under Flexural Loading

Flexural Performance of Concrete-Encased Concrete-Filled Steel Tubes