Abstract:A new dicarbazole-based donor, BCz3Ph , for exciplex formation was synthesized and characterized. The new green (PL λ max = 527 nm) exciplex BCz3Ph : PO-T2T (2 : 1) blend with a photoluminescence quantum yield (PLQY) of 43% and thermally activated delayed fluorescence (TADF) character was utilized as the emitting layer (EML) of solution-processed OLED devices. To facilitate hole injection into the EML, a new cross-linkable monomer, BCzC4Sy , adopting a dicarbazole core linked to a styrene group by a butyl chain was designed to realize a solvent resistant hole-transporting layer (HTL) after thermal polymerization. The flexible butyl (C4) bridge accounts for a lower polymerization temperature as compared to that of the methyl (C1)-bridged counterpart, BCzC1Sy , resulting in the formation of amorphous films with better solvent resistance as well as smoother morphology. The choice of dicarbazole as the HTL core not only suppresses the HTL-to-EML energy barrier, but also prevents the emission color variation stemming from the possible exciplex emission at the HTL/EML interface. The best OLED device with EQE max = 9.2%, CE max = 27.94 cd A −1 and PE max = 28.7 lm W −1 was obtained with a thermally polymerized BCzC4Sy film as the HTL. The device achieved a maximum luminance up to 22 000 cd m −2 together with a very low efficiency roll-off, retaining 97% efficiency at 1000 cd m −2 (EQE 1000cd = 8.9%). More significantly, a 2 × 2 cm 2 device fabricated by slot-die coating gave good color homogeneity and rather high brightness and promising efficiency (EQE 5.0%), manifesting the potential of employing a thermally cross-linkable HTM and exciplex-based EML to produce high efficiency solution-processed OLEDs.

Low-Temperature Annealing to Enhance Efficiency in Organic Small-Molecule Solution-Processable Oleds

High Fluorescence Rate of Thermally Activated Delayed Fluorescence Emitters for Efficient and Stable Blue OLEDs

The Effect of Low Temperature Thermal Annealing on the Properties of Organic Light‐emitting Device

Enhanced performances of fully solution-processed OLEDs via introducing flexible chains into thermally cross-linked thermally activated delayed fluorescent materials

Simultaneous Enhancement of Efficiency and Stability of OLEDs with Thermally Activated Delayed Fluorescence Materials by Modifying Carbazoles with Peripheral Groups

Considerable improvement in the stability of solution processed small molecule OLED by annealing

High Efficiency Solution-Processed Two-Dimensional Small Molecule Organic Solar Cells Obtained Via Low-Temperature Thermal Annealing

Introducing Steric Groups to Thermally Activated Delayed Fluorescence Emitter for Constructing Efficient Non-Doped Solution-Processed Organic Light-Emitting Diodes

Inverted annealing enhanced performance of organic thin-film transistors and phototransistors based on 2-(4-dodecylphenyl) [1]benzothieno[3,2-b]benzothiophene

Improving the Performance of Organic Light-Emitting Diodes Containing BCP/LiF/Al by Thermal Annealing

Improved efficiency of solution processed small molecules organic solar cells using thermal annealing

Low Efficiency Roll-Off Thermally Activated Delayed Fluorescence Emitters For Non-Doped Oleds: Substitution Effect Of Thioether And Sulfone Groups

“Trade‐off” Hidden in Condensed State Solvation: Multiradiative Channels Design for Highly Efficient Solution‐Processed Purely Organic Electroluminescence at High Brightness

Solution-processed high efficiency OLED harnessing a thermally cross-linked hole-transporting layer and exciplex-forming emission layer

Regulation of Peripheral Tert-Butyl Position: Approaching Efficient Blue OLEDs Based on Solution-Processable Hole-Transporting Materials

Annealing Solution-Processed CuSCN Hole Injection Layer for Blue Phosphorescent Organic Light-Emitting Diodes with Extremely Low Efficiency Roll-Off

Organic Light-Emitting Devices Based on Pcdtbt As Emitting Layer

Low-temperature thermal cross-linkable materials with benzocyclobutene groups for solution process of OLEDs

Thermal‐annealing dependence of crystallization on solution‐processed small‐molecule organic photovoltaics

High-Performance Organic Field-Effect Transistors of Liquid Crystalline Organic Semiconductor by Laser Mapping Annealing

Achieving 20% External Quantum Efficiency for Fully Solution-Processed Organic Light-Emitting Diodes Based on Thermally Activated Delayed Fluorescence Dendrimers with Flexible Chains.