Abstract:Since the first organic field-effect transistor (OFET) was reported in 1986, there has been remarkable progress in the development of OFETs. However, there remain some key challenges in this field,namely the mobility (most OFETs with a mobility lower than 1 cm V s), on/off ratio and environmental stability. Moreover, quantum mechanical calculations and structural analysis have predicted that high mobility can be obtained when conjugated molecules have strong interactions with neighboring molecules to maximize the overlap of p molecular orbits. Hence, theoretically speaking, a p stacked structure is expected to provide more efficient orbital overlap and thereby facilitates carrier transport. However, so far, the organic semiconductors which exhibit high mobility and high on/off ratio usually possess herringbone structure, e.g., rubrene and pentacene, which results in reduced intermolecular electronic couplings. The fundamental aspects of carrier transport in OFETs, especially the role of solid-state packing, are still under scrutiny. It is imperative to establish the structure-properties relationship both experimentally and theoretically for the carrier mobility of organic semiconductors. Phthalocyanines have attracted attentions in OFETs for some years because of their remarkably chemical and thermal stabilities, as well as non-toxicity and good field-effect properties. TiOPc is known as one of the most efficient organic photoconductors in the near-IR region and is currently used in more than 90 % laser printers. In contrast to other phthalocyanines, e.g., copper phthalocyanine, TiOPc is a nonplanar and polar molecule with the titanyl group located perpendicular to the macro cycle, with the outer phenyl rings making an angle of 7° with respect to the C-N inner ring, so that the molecule has a shallow square-pyramid structure (Fig. 1a). Three crystal structures of TiOPc have been reported so far, a monoclinic phase I (hereafter b-TiOPc), a triclinic phase II (hereafter a-TiOPc), and a triclinic phase Y. In the triclinic a-structure, TiOPc molecules form concave and

High-Performance Organic Field-Effect Transistors of Liquid Crystalline Organic Semiconductor by Laser Mapping Annealing

Inverted annealing enhanced performance of organic thin-film transistors and phototransistors based on 2-(4-dodecylphenyl) [1]benzothieno[3,2-b]benzothiophene

Synergistic Effect of Solvent Vapor Annealing and Chemical Doping for Achieving High-Performance Organic Field-Effect Transistors with Ideal Electrical Characteristics

High-resolution patterning of organic semiconductor single crystal arrays for high-integration organic field-effect transistors

Patterning Liquid Crystalline Organic Semiconductors via Inkjet Printing for High‐Performance Transistor Arrays and Circuits

Patterning Solution-Processed Organic Single-Crystal Transistors with High Device Performance

Investigating the Single Crystal OFET and Photo-Responsive Characteristics Based on an Anthracene Linked Benzo[b]benzo[4,5]thieno[2,3-D]thiophene Semiconductor

Liquid Crystal-Like Active Layer for High-Performance Organic Field-Effect Transistors

Direct laser patterning of organic semiconductors for high performance OFET-based gas sensors

High‐Performance and Stable Organic Thin‐Film Transistors Based on Fused Thiophenes

Water‐Surface‐Mediated Precise Patterning of Organic Single‐Crystalline Films via Double‐Blade Coating for High‐Performance Organic Transistors

An Ultra Closely [pgr]-Stacked Organic Semiconductor for High Performance Field-Effect Transistors

Organic-semiconductor: Polymer-electret Blends for High-Performance Transistors

Surface Selectively Deposited Organic Single-Crystal Transistor Arrays with High Device Performance

Pulsed Laser Annealing for Advanced Performance of Mechanically Flexible and Optically Transparent Multilayer MoS2transistors (presentation Recording)

Enhancing the Performance of Solution-Processed Thin-Film Transistors Via Laser Scanning Annealing

High Performance OTFTs Fabricated Using a Calamitic Liquid Crystalline Material of 2‐(4‐dodecyl Phenyl)[1]benzothieno[3,2‐b][1]benzothiophene

Dopant/Semiconductor/Electret Trilayer Architecture for High‐Performance Organic Field‐Effect Transistors

Driving Organic Field-Effect Transistors: Enhancing Crystallization and Electrical Performance with Blends and Inkjet Printing

High-Performance, Stable Organic Thin-Film Field-Effect Transistors Based on Bis-5‘-alkylthiophen-2‘-yl-2,6-anthracene Semiconductors

Low-Temperature Annealing to Enhance Efficiency in Organic Small-Molecule Solution-Processable Oleds