Abstract:Aluminum alloys undergoing deformation exhibit complex multi-type-void damage evolution driven by microscale heterogeneous deformation; in return, the accumulated damage evolution would affect the microscale heterogeneous deformation. Meanwhile, the above interaction depends significantly on the microstructure characteristics and determines the macroscale flow and ductile fracture behaviors. These make it difficult to model the deformation response and ductile fracture of aluminum alloys with various microstructures. Aiming at this issue, a micromechanicsbased damage constitutive model considering the mutual effects between microstructure, micro/ macro-scale deformation, and damage and fracture was developed in this study for deformation of aluminum alloys under tension-dominated loading conditions. During the modeling, the damage was characterized in terms of the evolutions of coexisting multi-type voids. The multiple-type voids were modeled separately as functions of the local micro-strain/stress of their respective phases and microstructure characteristics according to the micromechanical mechanisms. Furthermore, a self-consistent method was employed to calculate the heterogeneous micro-strain/ stress of phases and the overall macroscale flow behavior of the multiphase aggregate. In particular, the constitutive behavior of each phase in the self-consistent method was modeled by coupling the softening effect of void evolution and microstructure characteristics, thus the interaction between microscale heterogeneous deformation and damage evolution was captured. The model parameters were determined by matching the calculated and experimental evolutions of the multi-type voids measured via in-situ synchrotron radiation X-ray computed tomography and load-displacement curves during deformation. Applied to the 2219 aluminum alloy, this model accurately predicts the flow stress, damage evolution and fracture behavior under various microstructures and those of tailor-welded blanks with a gradient microstructure. Furthermore, the model clarifies the mutual effects between the microstructure, damage evolution and deformation behavior of aluminum alloys. The developed model can also be generalized to other multiphase metals containing a distribution of hard-brittle particles. And it is thus believed to be with a well general prediction for the deformation response and ductile fracture of this kind of multiphase metals with various microstructures or gradient microstructures, and further facilitates the understanding of their complex damage evolution and flow behavior.

MULTISTAGE FATIGUE MODELING FOR THREE WROUGHT ALUMINUM ALLOYS

High Cycle Fatigue Life Prediction Model Based on Crystal Plasticity and Continuum Damage Mechanics for Ni-based Single Crystal Superalloys under a Multiaxial Stress State

Low-cycle Fatigue Behavior and Life Prediction of TA15 Titanium Alloy by Crystal Plasticity-Based Modelling

Multi-physics Approach to Predict Fatigue Behavior of High Strength Aluminum Alloy Repaired via Additive Friction Stir Deposition

New ultra-low cycle fatigue model for metal alloys

Crystal plasticity modeling of low-cycle fatigue behavior of an Mg-3Al-1Zn alloy based on a model, including twinning and detwinning mechanisms

A fatigue model of high strength Al alloys containing second phase particles of various sizes

Development of a Novel Fatigue Damage Model with AM Effects for Life Prediction of Commonly-Used Alloys in Aerospace

Prediction of High Cycle Fatigue Strength for Additive Manufactured Metals by Defects Incorporated Crystal Plasticity Modeling

3D characterization and modeling of low cycle fatigue damage mechanisms at high temperature in a cast aluminum alloy

Multiaxial Fatigue Lifetime Estimation Based on New Equivalent Strain Energy Damage Model under Variable Amplitude Loading

A New Critical Plane-Energy Model for Multiaxial Fatigue Life Prediction of Turbine Disc Alloys

Modified Model for Evaluating Fatigue Behaviors and Lifetimes of Notched Aluminum-Alloys at Temperatures of 25°C and −70°C

A Multiscale High Cycle Fatigue Approach Based on Shakedown and Cohesive Zone Theories—application for Additive-Manufactured 316L Steel

A Multi-scale Corrosion Fatigue Damage Model of Aluminum Alloy Considering Multiple Pits and Cracks

Cyclic Deformation Behavior and Fatigue Life Prediction of an Automotive Cast Aluminum Alloy: A New Method of Determining Intrinsic Fatigue Toughness

A Micromechanics-Based Damage Constitutive Model Considering Microstructure for Aluminum Alloys

An Approach for Predicting the Low-Cycle-Fatigue Crack Initiation Life of Ultrafine-Grained Aluminum Alloy Considering Inhomogeneous Deformation and Microscale Multiaxial Strain

Establishment And Verification Of Multiaxis Fatigue Life Prediction Model

A MODIFIED LOW CYCLE FATIGUE DAMAGE MODEL FOR METALS

A mesoscopic damage model for the low-cycle fatigue of an extruded magnesium alloy