Abstract:<p>During laser powder bed fusion additive manufacturing, laser power absorption is governed by a protean pool of molten metal that can present as a highly reflective surface, a deeply absorbing cavity, or some amalgamation thereof. These melt pool dynamics have been linked to defect creation, porosity, and surface finish quality. Although these are therefore critical for determining final part quality, their instantaneous influence on laser absorption have only been explored through simulation. To date, direct real-time observations have been elusive due to the locally extreme environment. In this work, we focus a laser on Ti-6Al-4V powder and bare plate while quantifying the time-dependent, absolute energy absorption by monitoring omnidirectional backscattered laser intensity. We also simultaneously record the projective melt pool geometries with high-speed synchrotron x-ray imaging. We find that laser absorption strongly reflects the stability of the vapor depression over a wide range of applied laser powers, oxygen content in the processing atmosphere, and with the presence of powder. During laser scanning of a powder bed surface, we find a significant absorption reduction after 400 µs due to a dramatic change in the vapor depression aspect ratio – an event known to create porosity. As several industrial scan strategies necessitate thousands of these events during a build, their identification and control is of significant practical importance. Lastly, a normalized enthalpy model is demonstrated to be effective in quantifying the relationship between the laser absorption and cavity depth, even under transient conditions. In addition to providing vital quantitative data for simulation calibration, the correlation of melt pool geometry with laser absorption during realistic processing conditions suggests the use of a total backscattered light detection system for real-time process control.</p>

Absorption of some powder materials to YAG laser

Measurement of Laser Light Absorptivity of Commonly Used Metals in Laser Additive Manufacturing Technique

Using In-situ Technique to Determine Laser Absorptivity of Al-alloys

Layered Surface Structure of Gas-Atomized High Nb-containing TiAl Powder and Its Impact on Laser Energy Absorption for Selective Laser Melting

Yttrium for the Selective Laser Melting of Ti-45Al-8Nb Intermetallic: Powder Surface Structure, Laser Absorptivity, and Printability

Laser Absorptivity Measurements of Dual-phase Steel During Laser Heat Treatment

Energy Coupling Mechanisms and Scaling Behavior Associated with Laser Powder Bed Fusion Additive Manufacturing

LUMPED METHOD FOR THE MEASUREMENT OF LASER ABSORPTANCE OF MATERIALS

The causal relationship between melt pool geometry and energy absorption measured in real time during laser-based manufacturing

Simultaneous High-Speed X-Ray Transmission Imaging and Absolute Dynamic Absorptance Measurements During High-Power Laser-Metal Processing

Fabrication and deagglomeration of YAG nanopowders

Quantifying Laser Absorptivity of Ti–6Al–4V Powder through Additive Manufacturing Systems

On thermal properties of metallic powder in laser powder bed fusion additive manufacturing

Determination of Laser Absorptivity of Metal by Numerical Calculation Technique and Trial-And-Error Method

Determining the laser absorptivity of Ti-6Al-4V during laser powder bed fusion by calibrated melt pool simulation

Effect of Powder Spreading Parameters on Laser Absorption Behavior and Processability of High‐Strength Aluminum Alloy Fabricated by Laser Powder Bed Fusion

Study on Ablation Characteristics of Femyosecond Laser Nanoscale Processing for Aluminum Nitride and LeadZirconate Titanate Ceramics

Synthesis of Ytterbium-Doped Yttrium Aluminum Garnet Laser Ceramic Nano-Powders by Carbonate Altogether Precipitation Method

High Absorptivity Nanotextured Powders for Additive Manufacturing

Laser‐induced self‐propagating synthesis and electromagnetic wave absorption properties of MoAlB powders

Fabrication, microstructure, spectral properties, and laser performance of Yb:GdxY3−xAl5O12 ceramics