Abstract:With the raw materials of poly(vinylidene-co-hexafluoropropylene) (P(VDF-HFP)) and polyamide 6 (PA6, nylon 6), a sandwich-structured composite membrane, PA6/P(VDF-HFP)/PA6, is fabricated via sequential layer-by-layer electrospinning. The nylon-based composite exhibits high absorption to organic liquid electrolyte (270 wt%) owing to its high porosity (90.35%), good mechanical property (17.11 MPa), and outstanding shut-down behavior from approximately 145 to 230 degrees C. Moreover, the dimensional shrink of a wet PA6 porous membrane immersed into liquid electrolyte is cured due to the existence of the P(VDF-HFP) middle layer. After swelling by the LiPF6-based organic liquid electrolyte, the obtained PA6/P(VDF-HFP)/PA6-based gel polymer electrolytes (GPE) shows high ionic conductivity at room temperature (4.2 mS cm(-1)), a wide electrochemical stable window (4.8 V), and low activation energy for Li(+)ion conduction (4.68 kJ mol(-1)). Benefiting from the precise porosity structure made of the interlaced electrospinning nanofibers and the superior physicochemical properties of the nylon-based composite GPE, the reversible Li(+)ion dissolution/deposition behaviors between the GPE and Li anode are successfully realized with the Li/Li symmetrical cells (current density: 1.0 mA cm(-2); areal capacity: 1.0 mAh cm(-2)) proceeding over 400 h at a polarization voltage of no more than 70 mV. Furthermore, the nylon-based composite GPE in assembled Li/LiFePO(4)cells displays good electrochemical stability, high discharge capacity, good cycle durability, and high rate capability. This research provides a new strategy to fabricate gel polymer electrolytes via the electrospinning technique for rechargeable lithium batteries with good electrochemical performance, high security, and low cost.

A Renewable Gel Polymer Electrolyte Based on the Different Sized Carboxylated Cellulose with Satisfactory Comprehensive Performance for Rechargeable Lithium Ion Battery

High-strength and flexible cellulose/PEG based gel polymer electrolyte with high performance for lithium ion batteries

A Cellulose/Polyethylene Oxide Gel Polymer Electrolyte with Enhanced Mechanical Strength and High Ionic Conductivity for Lithium‐Ion Batteries

A phosphorylated nanocellulose/hydroxypropyl methylcellulose composite matrix: A biodegradable, flame-retardant and self-standing gel polymer electrolyte towards eco-friendly and high safety lithium ion batteries

Carboxymethylated nanocellulose-based gel polymer electrolyte with a high lithium ion transfer number for flexible lithium-ion batteries application

A renewable and biodegradable nanocellulose-based gel polymer electrolyte for lithium-ion battery

Preparation and Properties of a High-Performance EOEOEA-Based Gel-Polymer-Electrolyte Lithium Battery

Gel polymer electrolyte with high performances based on polyacrylonitrile composite natural polymer of lignocellulose in lithium ion battery

Polyethylene glycol-grafted cellulose-based gel polymer electrolyte for long-life Li-ion batteries

Cellulose-based Gel-Type Electrolyte Fabricated by Lyophilization to Enable Uniform Li+ Ion Flux Distribution for Stable Li Metal Anodes with High-Rate Capability

The critical role of in-situ lithium fluoride in gel polymer electrolyte for high-performance rechargeable batteries

In-Situ Formed Phosphorus Modified Gel Polymer Electrolyte with Good Flame Retardancy and Cycling Stability for Rechargeable Lithium Batteries

Nylon-Based Composite Gel Membrane Fabricated via Sequential Layer-By-Layer Electrospinning for Rechargeable Lithium Batteries with High Performance

A Biobased Composite Gel Polymer Electrolyte with Functions of Lithium Dendrites Suppressing and Manganese Ions Trapping

An in-situ cross-linked network PMMA-based gel polymer electrolyte with excellent lithium storage performance

Electrospun polyimide/cellulose acetate propionate nanofiber membrane-based gel polymer electrolyte with fast lithium-ion transport and high interface stability for lithium metal batteries

A novel gel polymer electrolyte based on trimethylolpropane trimethylacrylate/ionic liquid via in situ thermal polymerization for lithium-ion batteries

Gel Polymer Electrolytes Based on an Interconnected Porous Matrix Functionalized with Poly(ethylene Glycol) Brushes Showing High Lithium Transference Numbers for High Charging-Rate Lithium Ion Batteries

An Environmentally Friendly and Economic Membrane Based on Cellulose As A Gel Polymer Electrolyte for Lithium Ion Batteries

Excellent Polymerized Ionic-Liquid-Based Gel Polymer Electrolytes Enabled by Molecular Structure Design and Anion-Derived Interfacial Layer