Abstract:An organic/inorganic support of immobilizing catalysts for ethylene polymerization was devised. The composition of the hybrid catalyst is as following: styrene and acrylic copolymer (PSA) is the organic part for binding iron (III) acetylacetonate and his(imino) pyridyl ligand catalyst,and SiO2, (Davison 955 silical gel) is the inorganic part. The inorganic part is coated by the organic part (PSA) by sol-gel method. The catalyst could produce not only high crystallinity (72%) polyethylene,but also alpha-olefin. We considered the impact of different membrane materials and polymerization conditions (different cocatalyst, pressure, temperature, Al/Fe molar ratio) to the polymerization activity and properties of polymers and found that temperature had the greatest impact to the weight ratio of oligomer to PE. Because of the poor thermal stability of catalyst, the catalytic activity significantly attenuated with increasing temperature. When pressure increased, catalytic activity would increase too. The relationship of pressure and catalytic activity met the cossee catalytic reaction mechanism, which was widely accepted in Ziegler-Natta catalyst ' s ethylene polymerization mechanism. Different membrane materials would affect the final polyethylene product performance, the pure PSA as organic part would increase the molecular weight significantly. Cocatalysts affect not only the catalytic performance,but also the property of the final product. The alkylaluminium as cocatalyst tended to decrease the molecular weight. The iron catalyst system binding on the PSA after the treatment of magnesium chloride could produce the polyethylene of lower molecular weight (M-w = 11. 9 x 10(4)) and higher crystallinity (72%). And the polyethylene s melt index MI (2. 35 g/10min) was higher than the iron catalyst binding on other membrane materials. The polyethylene can be used as the low molecular weight part of bimodal polyethylene.

Regulating the Monomers Composition Ratio Inside the Particle Nanodomains with Induced Condensing Agent and Its Impact on Particle Growth

Influence of Small Amount of Co-Monomers on Acrylonitrile Polymerization in Dimethylformamide (DMF) Solution

Enhanced Multiphase Interfacial Interaction of Impact Polypropylene Copolymer by In-Situ Introducing Polyethylene

Control of Diffusion/Barrier Effects of Polymer-Coated Particles and the Strengthening of Ethylene Polymerization Reactor

Liquid Containing Particle Polymerization: Ethylene/-Olefin Reaction in a New Environment

Effect of Temperature Switching and Dynamic Phase Equilibrium on Polymer Microstructure in Condensed-Mode Operation

Molecular Dynamics Simulation of in Situ Polymerization: Chain Conformation Transition

Investigation of a Dynamic Operation Mode of Ethylene Polymerization Process with a Liquid-Containing Fluidized Bed

On-line Fast Detection and Control of Composition for Binary Gas-Phase Copolymerization of Olefins

ETHYLENE POLYMERIZATION WITH CORE-SHELL ZIEGLER-NATTA HYBRID CATALYSTS

Effect of Oleic Acid-modified Nano-CaCO3 on the Crystallization Behavior and Mechanical Properties of Polypropylene

Destruction Mechanism of Core–shell Particles in Impact Polypropylene Copolymer During Short Molten-State Annealing

Microstructure, morphology, crystallization and rheological behavior of impact polypropylene copolymer

Influence of Copolymerization Conditions on the Structure and Properties of Polyethylene/Polypropylene/Poly(Ethylene-Co-Propylene) In-Reactor Alloys Synthesized in Gas-Phase with Spherical Ziegler-Natta Catalyst

Crystallization Behavior of a Propylene-1-butene Random Copolymer in Its Α and Γ Modifications

Study on thermal behavior of impact polypropylene copolymer and its fractions

Influence of Polymerization Conditions on the Structure and Properties of Polyethylene/polypropylene In‐reactor Alloy Synthesized in the Gas Phase with a Spherical Ziegler–Natta Catalyst

Organic/Inorganic Support for Immobilizing Iron (iii) Acetylacetonate and Bis(Imino)Pyridyl Ligand Catalyst System for Ethylene Polymerization

Influence of molten-state annealing on the phase structure and crystallization behaviour of high impact polypropylene copolymer

Influence of compounded α/β-nucleating agents on the crystallization behavior and mechanical properties of isotactic polypropylene

Effects of Comonomer Content, Comonomer Distribution and Crystallization Condition on Crystallinity and Dimension of Crystal Lattice of Ethylene-Propylene Copolymers