Abstract:The conversion of Al-substituted goethite (Al-goethite) to hematite in gibbsitic bauxite is conducive to alumina extraction during the Bayer process and the enrichment of iron minerals in red mud. In this work, mineralogical characteristics of gibbsitic bauxite were identified by AMICS analysis, and the low-temperature thermal conversion behavior of both synthetic Al-goethite and natural Al-goethite in gibbsitic bauxite were investigated through thermal gravity analysis, phase transformation, and microstructure studies. Results show that the proportion of aluminum in Al-goethite reached 12.68% of the total aluminum content in gibbsitic bauxite. The conversion of synthetic Al-goethite to hematite starts at ∼280 °C, while that of natural Al-goethite starts at ∼320 °C, and the addition of NaOH can accelerate the conversion. The formed hematite inherits the needle-like appearance of the original Al-goethite, has many holes on the surface due to dehydroxylation, and no migration of aluminum elements occurs during the roasting process, indicating that Al-goethite transformed into porous Al-substituted hematite (Al-hematite), which is beneficial to the extraction of the aluminum retained in the hematite structure during Bayer digestion. To confirm the above results, digestion experiments (without or with roasting for typical Bayer digestion or low-temperature roasting-Bayer digestion) were carried out with gibbsitic bauxite and the one roasted at 400 °C for 30 min as raw materials, respectively. Compared to the typical Bayer digestion, the relative alumina recovery of low-temperature roasting-Bayer digestion increased from 90.06% to 95.65%, the red mud yield decreased from 36.32% to 34.08%, and the grade of Fe in red mud increased from 48.45% to 52.88% at 270 °C for 60 min. Enhanced transformation of Al-goethite significantly improves alumina recovery and the resultant iron-rich red mud can be easily co-processed in the steel industry, thus significant emission reduction of red mud from the Bayer system might be achieved.

Study On Effective Extraction Of Al And Fe From High-Iron Bauxite Through "Calcification-Carbonization" Method

Green and Efficient Utilization of Ferruginous Gibbsite Ore and Ferruginous Manganese Ore by Synergetic Carbothermic Co-Reduction–Magnetic Separation Process

Treatment and utilization of bauxite residue

An Innovative Technique for Comprehensive Utilization of High Aluminum Iron Ore via Pre-Reduced-Smelting Separation-Alkaline Leaching Process: Part I: Pre-Reduced-Smelting Separation to Recover Iron

Study on Iron Extraction from High Iron Bauxite Residue by Pyrite Reduction

Highly efficient separation of titanium minerals from a modified bauxite residue through direct reduction: A comparison study

Enrichment and Recovery Fe-containing Phases from High Iron Gibbsite Ore Based on Metallized Reduction and Magnetic Separation

Aluminum–iron separation in high‐acid leaching solution and high‐purity alumina preparation

Recovery of Iron and Aluminum from Bauxite Residue by Carbothermic Reduction and Slag Leaching

Recovery of iron and calcium aluminate slag from high-ferrous bauxite by high-temperature reduction and smelting process

Spinel Ferrite Transformation for an Efficient Fe Removal from Circulating Fluidized Bed Fly Ash by Carbothermal Reduction at a Low Temperature.

An efficient and environmental friendly strategy for alumina extraction and Fe–Si alloys production from coal fly ash by combining vacuum thermal reduction, alkali dissolving, and magnetic separation

Acid Leaching Extraction Mechanism of Aluminum and Iron Ions from Coal Gangue Based on CaF2 Assistance and Process Optimization

Cleaning Disposal of High-Iron Bauxite Residue Using Hydrothermal Hydrogen Reduction

Extraction of Fe and Al from red mud using carbothermic reduction followed by water leaching

Experimental study on extraction alumina from calcium aluminate slag

Fe-Si alloys production and alumina extraction from coal fly ash via the vacuum thermal reduction and alkaline leaching

Iron Extraction from Red Mud using Roasting with Sodium Salt

Recovery of aluminum oxide and iron oxide from aluminum electrolysis iron-rich cover material and preparation of aluminum fluoride

Low-temperature thermal conversion of Al-substituted goethite in gibbsitic bauxite for maximum alumina extraction

Extraction and Utilization of Valuable Elements from Bauxite and Bauxite Residue: A Review