Abstract:It is commonly known that an accurate analysis of a large structure requires an accurate analytical model. This is also true for the inverse analysis of a structural system where measured structural responses are used as input to assess the structural conditions. However, an accurate model of the structure is always not available in practice. Two substructural identification methods are presented in this paper with the structure divided into substructures and with one substructure assessed at one time. In the first method, an accurate finite element model of the whole structure is assumed known. A state space method is applied to identify the external forces acting on the structure, and a damage identification method is then applied to identify the local damages using time domain information. Iterative model updating method based on the measured acceleration in the selected substructure is employed for the assessment. The second identification method requires only the finite element model of the substructure. The interface forces and the external forces acting on the target substructure are all taken as excitations and they are identified in state space. The substructure is then assessed similar to the first method. Since the target substructure for updating consists of a much reduced number of components and the identification problem is more efficient. The validation of the proposed methods is demonstrated by a truss structure with polluted measured accelerations with promising results.

SUBSTRUCTURE METHOD OF DAMAGE IDENTIFICATION WITHOUT INPUT INFORMATION

Substructure methods for structural condition assessment

Substructural Damage Detection with Incomplete Information of the Structure

Damage Identification in a Substructure of a Box-section Girder

Structural Damage Detection from Coupling Forces Between Substructures under Support Excitation

Calculation of Dynamic Response Sensitivity to Substructural Damage Identification under Moving Load

Substructure Damage Identification Using Damage Tracking Technique

Substructural identification for damage estimation of structures

Substructure based structural damage detection with limited input and output measurements

A Substructure Approach for Damage Detection of Large Size Structures under Limited Input and Output Measurements

Damage identification of structures with substructural flexibility

A Two-Step Approach for Structural Damage Localization and Quantification Using Static and Dynamic Response Data

A Two-Step Method for Structural Damage Identification Using Static Residual Force and Modal Strain Energy

Damage Identification of Structures Including System Uncertainties and Measurement Noise

Damage Detection of a Substructure Based on Response Reconstruction in Frequency Domain

Structural Damage Identification Based On Residual Force Vector And Response Sensitivity Analysis

A Structural Damage Identification Procedure With Application To A Frame Structure With Bolted Joints

Structural damage identification using system dynamic properties

Damage Identification of Substructure for Local Health Monitoring

A two-stage damage identification method for a proportional damage structure

A new structural damage identification method