Abstract:It is commonly known that an accurate analysis of a large structure requires an accurate analytical model. This is also true for the inverse analysis of a structural system where measured structural responses are used as input to assess the structural conditions. However, an accurate model of the structure is always not available in practice. Two substructural identification methods are presented in this paper with the structure divided into substructures and with one substructure assessed at one time. In the first method, an accurate finite element model of the whole structure is assumed known. A state space method is applied to identify the external forces acting on the structure, and a damage identification method is then applied to identify the local damages using time domain information. Iterative model updating method based on the measured acceleration in the selected substructure is employed for the assessment. The second identification method requires only the finite element model of the substructure. The interface forces and the external forces acting on the target substructure are all taken as excitations and they are identified in state space. The substructure is then assessed similar to the first method. Since the target substructure for updating consists of a much reduced number of components and the identification problem is more efficient. The validation of the proposed methods is demonstrated by a truss structure with polluted measured accelerations with promising results.

Substructural identification for damage estimation of structures

Substructural Damage Identification Using Autoregressive Moving Average with Exogenous Inputs Model and Sparse Regularization

SUBSTRUCTURE METHOD OF DAMAGE IDENTIFICATION WITHOUT INPUT INFORMATION

Substructural Damage Detection with Incomplete Information of the Structure

A Substructure Approach for Damage Detection of Large Size Structures under Limited Input and Output Measurements

Substructure based structural damage detection with limited input and output measurements

Substructure methods for structural condition assessment

Structure Damage Identification Based on Regularized ARMA Time Series Model under Environmental Excitation

Damage identification of structures with substructural flexibility

Detection of Local Damage in Complex Nonlinear Structures Based on Substructural Approach

Substructure Damage Identification Using Damage Tracking Technique

Damage Identification of Substructure for Local Health Monitoring

Damage Detection of a Substructure Based on Response Reconstruction in Frequency Domain

Calculation of Dynamic Response Sensitivity to Substructural Damage Identification under Moving Load

Damage Identification by the Data Expansion and Substructuring Methods

A new structural damage identification method

Damage Identification in a Substructure of a Box-section Girder

Structural damage identification based on sensitivity analysis of autoregressive coefficients of time series models

Structural damage detection with limited input and output measurement signals

Substructural Identification Using Neural Networks

Structural Damage Identification Based on Substructure Sensitivity and L 1 Sparse Regularization