Abstract:Advances in Structural Engineering, Ahead of Print. The external excitations, interface forces and responses at the interface degrees-of-freedom are normally required in many existing substructural condition assessment methods, while they are difficult or even impossible to be accurately measured. To address this issue, a digital twin framework for output-only substructural damage identification with data fusion of muti-type responses is proposed in the present paper. First, heterogeneous responses including displacements, strains and accelerations from the target substructure are measured and divided into two sets. The multi-type responses in measurement set 2 are reconstructed with the first set of responses and transmissibility matrix in time domain. Then, a recovery method is introduced to obtain angular displacements from translational displacements and strains, to acquire angular accelerations from translational accelerations and the second order derivatives of strains by continuous wavelet transform. The recovered angular displacements and angular accelerations are involved into the evaluation of objective function. Besides, to avoid the single and monotonous search operation of traditional optimization algorithms, a reinforced learning-assisted Q-learning hybrid evolutionary algorithm (QHEA) by integrating Q-learning algorithm, differential evolution algorithm, Jaya algorithm, is developed as a search tool to solve the optimization-based inverse problem. The most suitable search strategy among DE/rand/1, DE/rand/2, DE/current-to-best/1, Jaya mutation in each iteration is selected and implemented under the guidance of Q-learning algorithm. Numerical studies on a three-span beam structure are performed to verify the effectiveness of the proposed approach. The results demonstrates that the proposed output-only substructural damage identification approach can accurately identify locations and severities of multiple damages even with high noise-polluted responses.

Damage Identification in a Substructure of a Box-section Girder

New Damage Identification Method for Operational Metro Tunnel Based on Perturbation Theory and Fuzzy Logic

Locate Damage Based on Change in Structural Shape Calculated from Uniform Load Surface

Damage Identification in Warren Truss Bridges by Two Different Time–Frequency Algorithms

Substructural damage identification in a digital twin framework using heterogeneous response reconstruction

Damage Identification Of The Multi-Box Girder Bridge By Modal Curvature Method

Structural damage identification using static test data and changes in frequencies

Substructural identification for damage estimation of structures

Structural damage identification using system dynamic properties

Damage Identification of Multi-Box Steel-Concrete Composite Bridges Based on Modal Curvature Difference Method

Damage Assessment Using The Energy Dissipation Ratio Of Acceleration Signals

Damage Identification Of Girder Structure Based On Curvature Mode And Uniform Design

Structural damage identification based on dynamic deflection sensitivity of bridge under vehicle loading

Damage Assessment Of Structural Joints Using System Identification Techniques

Combined Joint and Member Damage Identification of Semi-Rigid Frames with Slender Beams Considering Shear Deformation

A structural damage identification method for plate structures

Damage Identification by the Data Expansion and Substructuring Methods

Damage detection of high-speed railway box girder using train-induced dynamic responses

Two-stage damage detection to a benchmark structure using ambient data

Detecting localized damage in cantilevered structures under nonstationary ambient excitations via Gabor spectral mode transmissibility functions

Structural Damage Identification using Modal Data. II: Test Verification