Abstract:Solid oxide fuel cells (SOFCs) are ideally suited for environmentally benign conversion of chemical energy in hydrocarbons to electricity. While medium scale SOFC power systems in the hundreds of kWe have been demonstrated, larger scale application of such systems have been hobbled by still too high cost. In order to bring down the cost of these systems, manufacturing costs have to be decreased while the power densities have to be improved. Achieving these twin goals will require the reduction of operating temperatures of the cells. On a single cell level, the largest source of performance loss at lower operating temperatures occurs in the cathode. Thus many different groups are presently investigating a slew of new cathode materials. While the performance of the new cathode materials are impressive under controlled operating conditions, it is presently not clear whether they will stand up to the rigorous and punishing operating environments of actual fuel cell stacks. In particular the interfacial and bulk stability of the new generation of cathode materials such as strontium doped lanthanum cobaltites, strontium doped lanthanum cobaltites , and lanthanum nickelates when exposed to anodic gases such as carbon dioxide and water vapor is presently unknown. Exposure to at least trace amounts of anodic gases during the lifetime of the stack is a likely occurrence and could arise from back diffusion, pinholes in the electrolyte and/or interconnection, or compromised seals. Thus, it is important to have a clear understanding of the thermodynamic and kinetic stability of both the interfaces and the bulk of the cathode material under exposure to the aforementioned anodic gases. In this paper, we present results from a study that combines electrochemical and x-ray measurements of the impact of carbon dioxide exposure on strontium doped lanthanum cobalt iron oxide (LSCF), as a function of strontium dopant concentration, gas composition, and temperature. These are combined with computational studies of the stability of the LSCF cathode to carbon dioxide exposure. The longer term goal of this study is to identify cathode compositions which have long term stability to exposure to trace anode side gases.

Effect of Carbon Dioxide on the Cathodic Performance of Solid Oxide Fuel Cells

Effect of Carbon Dioxide on the Cathodic Performance of Solid Oxide Fuel Cells

Influence of CO2 on the Cathode Performance and Stability of La1-XSrxCo0.2Fe0.8O3-Î´ in Solid Oxide Fuel Cells

Effect of Atmospheric Carbon Dioxide on Surface Segregation and Phase Formation in La0.6Sr0.4Co0.2Fe0.8O3-δThin Films

Effect of Atmospheric Carbon Dioxide and Strontium Content on Surface Segregation in Strontium Doped Lanthanum Cobalt Iron Oxide Thin Films

Surface Modifications of Nano-Structured Cathodes to Enhance Durability of Intermediate Temperature Solid Oxide Fuel Cells

Antimony-doped Strontium Cobalt Oxide As Promising Cathode for Low-Temperature Solid Oxide Fuel Cell with Excellent Carbon Dioxide Tolerance

Performance Stability and Degradation Mechanism of La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3−δ Cathodes under Solid Oxide Fuel Cells Operation Conditions

Effect of temperature on the chromium deposition and poisoning of La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ cathodes of solid oxide fuel cells

Evaluation of the CO2 Poisoning Effect on a Highly Active Cathode SrSc(0.175)Nb(0.025)Co(0.8)O(3-δ) in the Oxygen Reduction Reaction.

Study on the ORR Mechanism and CO2-Poisoning Resistance of La0.8Sr0.2MnO3-δ-coated Ba0.5Sr0.5Co0.8Fe0.2O3-δCathode for Intermediate Temperature Solid Oxide Fuel Cells

Enhanced oxygen reduction reaction of LaSrCoO4–Ce0.9Mn0.1O2 composite cathode for solid oxide fuel cells

Suppression of Sr surface segregation in La0.8Sr0.2Co0.2Fe0.8O3-delta via Nb doping in B-site

Effects of Gd0.8Ce0.2O1.9−δ Coating with Different Thickness on Electrochemical Performance and Long-Term Stability of La0.8Sr0.2Co0.2Fe0.8O3-δ Cathode in SOFCs

The Chemical Evolution of the La0.6Sr0.4CoO3−δ Surface Under SOFC Operating Conditions and Its Implications for Electrochemical Oxygen Exchange Activity

Improving the Stability of La0.6Sr0.4Co0.2Fe0.8O3-δ Electrode for Solid Oxide Fuel Cells by Introducing Sintering Inhibitors

Chemical Compatibility, Thermal Expansion Matches and Electrochemical Performance of SrCo0.8Fe0.2O3−δ–La0.45Ce0.55O2−δ Composite Cathodes for Intermediate-Temperature Solid Oxide Fuel Cells

Effect of Atmospheric CO2 on Surface Segregation and Phase Formation in La0.6Sr0.4Co0.2Fe0.8O3− Thin Films

Enhanced Electrochemical Performance and Operating Stability of La0.8Sr0.2Co0.2Fe0.8O3-δ Fiber Cathode Via Gd0.2Ce0.8O1.9-δ Coating for Intermediate Temperature Solid Oxide Fuel Cells

Thermodynamic Stability Assessment of MIEC Cathode Materials for Solid Oxide Fuel Cells

Preparation, Structure and Performance of La0.6Sr0.4Co0.2Fe0.8O3 Cathodes of Intermediate Temperature Solid Oxide Fuel Cells