Abstract:A minor amount of CO2 in air usually causes a detrimental effect on oxygen activation over a solid oxide fuel cell (SOFC) cathode because insulating surface carbonate is easily formed, which inhibits charge transfer during the oxygen reduction reaction (ORR). In this study, we report that the detrimental effect due to the CO2 interaction with perovskite oxide can be turned into a beneficial effect for facilitating ORR through tailoring the material composition of the perovskite. More specifically, for cobalt-free SrSc0.025Nb0.075Fe0.9O3-δ (SSNF), the exposure to the CO2 atmosphere results in the formation of a minor amount of surface strontium carbonate mainly in the form of a nanofilm over the perovskite surface, which protects the electrode from further corrosion by CO2, thus achieving a relatively stable performance even under a 10% CO2-containing air atmosphere. When CO2-free air is restored, the SrCO3 is successfully decomposed at intermediate temperatures. As a result, the surface reaction kinetics is recovered to the initial degree while the charge transfer process is obviously improved. An area-specific resistance of only 0.07 Ω cm2 is achieved at 650 °C after the CO2-induced surface activation, much smaller than the original value of 0.13 Ω cm2. In addition, the CO2-treated electrode shows a fairly stable performance for ORR under a subsequent CO2-free air atmosphere. To create such a beneficial effect, it is critical to tailor the degree of interaction of the perovskite surface with CO2, while the benchmark Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF) shows a too strong interaction with CO2 with the formation of bulk-phase-like carbonate, which failed to decomposed even when restored with a CO2-free atmosphere at intermediate temperatures, and as a result, worsened the ORR activity after the CO2 treatment.

Evaluation of the CO2 Poisoning Effect on a Highly Active Cathode SrSc(0.175)Nb(0.025)Co(0.8)O(3-δ) in the Oxygen Reduction Reaction.

Bismuth doped Sr2Fe1.5Mo0.5O6-3 double perovskite as a robust fuel electrode in ceramic oxide cells for direct CO2 electrolysis

Evaluation of A-site deficient Sr1−xSc0.175Nb0.025Co0.8O3−δ (x=0, 0.02, 0.05 and 0.1) perovskite cathodes for intermediate-temperature solid oxide fuel cells

High-performance and CO2‐resistant cathode toward electrocatalytic oxygen reduction for solid oxide fuel cells: Doped ceria and SrCo0.7Nb0.1Ni0.2O3-δ composite

Turning Detrimental Effect into Benefits: Enhanced Oxygen Reduction Reaction Activity of Cobalt-Free Perovskites at Intermediate Temperature via CO2-Induced Surface Activation

High-Performance Srnb0.1co0.9-Xfexo3-Delta Perovskite Cathodes For Low-Temperature Solid Oxide Fuel Cells

Evaluation of SrSc0.175Nb0.025Co0.8O3-δ Perovskite As a Cathode for Proton-Conducting Solid Oxide Fuel Cells: the Possibility of in Situ Creating Protonic Conductivity and Electrochemical Performance

CO2-induced In-Situ Surface Reconfiguration of Strontium Cobaltite-Based Perovskite for Accelerated Oxygen Reduction Reaction

A New Highly Active and CO2-stable Perovskite-Type Cathode Material for Solid Oxide Fuel Cells Developed from A- and B-site Cation Synergy

Effect of octahedral occupancy of bimetal-doping and CO 2 -induced surface reconstruction on oxygen reduction reaction of cobalt-based perovskite oxides

Mechanism Analysis of CO2 Corrosion on Ba0.9Co0.7Fe0.2Nb0.1O3−δ Cathode

A High Performance Composite Cathode with Enhanced CO2 Resistance for Low and Intermediate-Temperature Solid Oxide Fuel Cells

Enhanced oxygen reduction kinetics of SrCoO 3-δ by Ta/Cu or Nb/Cu co-doping as high-performance cathodes for SOFC

Tuning the Oxygen Vacancy of the SrSc0.175Nb0.025Co0.8O3−δ Cathode Toward Enhanced Oxygen Reduction Reaction for H+-SOFCs by Water Uptake

Textured Sr₂Sc 0.1 Nb 0.1 Co 1.5 Fe 0.3 O 6-2δ Thin Film Cathodes for IT-SOFCs.

A CO2-tolerant SrCo(0.8)Fe(0.15)Zr(0.05)O(3-delta)cathode for proton-conducting solid oxide fuel cells

A CO2-tolerant SrCo0.8Fe0.15Zr0.05O3−δ cathode for proton-conducting solid oxide fuel cells

A SrCo0.9Ta0.1O3-δ derived medium-entropy cathode with superior CO2 poisoning tolerance for solid oxide fuel cells

Structural, electrical and electrochemical characterizations of SrNb0.1Co0.9O3−δ as a cathode of solid oxide fuel cells operating below 600°C

Highly Oxygen Non-Stoichiometric BaSc0.25Co0.75O3- as a High-Performance Cathode for Intermediate-Temperature Solid Oxide Fuel Cells

Sc and Nb Dopants in SrCoO3 Modulate Electronic and Vacancy Structures for Improved Water Splitting and SOFC Cathodes