Abstract:Non-metallic inclusions are known to be a significant cause of microstructural deterioration in the single-crystal Ni-based superalloy DD6, resulting in the initiation and propagation of damage. Previous experimental results have revealed that AlN particles are dispersed individually in several regions within the γ′ free zone, situated beneath the oxide layer. However, areas where these particles agglomerate, whether they contain solely AlN particles or clustered with Al2O3 particles, are the most damaging and attractive sites for surface cracks arising in the oxide layers. Interfacial debonding between the particle and matrix, particle fracture, and matrix cracking caused damage initiation in the agglomerate region. To study the damage behavior of the agglomerate area belonging to the γ′-free region and how those particles influence the mechanical drivers of damage nucleation, we developed a new framework based on the Extended Finite Element Method (XFEM) and crystal plasticity (CP) theory. We employed a creep-damage model in a crystal plasticity (CP) framework combined with the XFEM approach to predict the micro-cracks in the agglomerate area (γ′-free zone). We also used the cohesive zone method (CZM) to simulate the interfacial debonding between the γ′ free region and each of the AlN and Al2O3 particles, and cohesive behavior-based XFEM is used to model the particle fracture. The fracture properties of the interface layer between the γ′ free zone and particles, as well as the agglomerated particles, were determined., followed by an assessment of the effects of particle agglomerate on damage mechanisms, including interfacial debonding, particle fracture, and matrix cracking in the agglomeration region. Interfacial partial decohesion of agglomerated AlN particles was prevalent with interparticle microcracking, making the agglomeration area between the AlN particles attractive for surface cracks. In contrast, the damage initiation delay with relatively low rates caused by particle fracture was the damage behavior of the agglomerated Al2O3 model. The consistency between numerical and experimental results confirmed the ability of this framework to capture microstructure-sensitive microcracks.

Effects of progressive wear of the hollow-sphere abrasive grain on recrystallization of DD6

Grinding subsurface damage mechanism of nickel-based single crystal superalloy based on stress-strain

Grinding surface and subsurface stress load of nickel-based single crystal superalloy DD5

Research on the mechanism of DD6 single crystal superalloy wear resistance improvement by femtosecond laser modification

Plastic deformation mechanism of grinding subsurface of nickel-based single-crystal superalloy

Degradation and Dislocation Evolution of the Nickel-Based Single Crystal Superalloy DD6 under the Coupling High-Speed Rotating and High Temperature Environments

Analytical and experimental study on micro-grinding surface-generated mechanism of DD5 single-crystal superalloy using micro-diamond pencil grinding tool

Effect of Warm Laser Shock Peening on the Low-Cycle Fatigue Behavior of DD6 Nickel-Based Single-Crystal Superalloy

Effect of grinding damage on cutting force and ductile machining during single grain scratching of monocrystalline silicon

Study on microstructure evolution and recrystallization behavior of nickel-based superalloy robot abrasive belt grinding surface under high-temperature exposure

Multi-scale modeling reveals microstructural and mechanical evolution in GH4169 and DD5 nickel-based superalloys during grinding

Effects of particle agglomeration in the γ′-free zone on the damage evolution of single-crystal Ni-based superalloys

Comparative investigation on wear behavior of brown alumina and microcrystalline alumina abrasive wheels during creep feed grinding of different nickel-based superalloys

Kinetics of Cellular Discontinuous Precipitation in A Re-Containing Single Crystal Superalloy

Influence of Electroplated CBN Wheel Wear on Grinding Surface Morphology of Powder Metallurgy Superalloy FGH96

Crystal plasticity theory coupled with meso-damage to predict the ratchetting behavior of nickel-based single crystal superalloy

Effect of Recrystallization on Low-Cycle Fatigue Behavior of DZ4 Directionally-Solidified Superalloy

Microstructural Evolution and Compositional Homogenization of a Low Re-bearing Ni-based Single Crystal Superalloy During Through Progression of Heat Treatment

CBN grain wear and its effects on material removal during grinding of FGH96 powder metallurgy superalloy

Damage evolution and removal behaviors of GaN crystals involved in double-grits grinding

Investigation on abrasive wear of electroplated diamond belt in grinding nickel-based superalloys