Abstract:CO2 gasification-reforming is a promising approach for the transformation of carbonaceous materials into CO-rich syngas. Within municipal solid waste and agricultural waste streams, plastics are commonly found intermixed with biomass waste. This study delves into the CO2 gasification-reforming of biomass (cellulose) and various plastics (PET, HDPE, and PS) using a self-built online weighing fixed bed reactor and a two-stage fixed bed reactor. During the gasification-reforming of cellulose-plastic mixtures without the catalyst, the experimental gas production rate of cellulose slightly decreased, with the peak of gas production migrating to a higher temperature range. This phenomenon can be attributed to the molten plastic adhering to the cellulose surface, which impeded heat and mass transfer essential for cellulose decomposition. Furthermore, the gas production from plastics was suppressed in the mixtures, likely due to the interference of cellulose char in the decomposition of plastics. The incorporation of 2%Ni/CeO2 catalysts not only augmented gas yields and production rates but also emphasized the synergistic interactions. For the cellulose-HDPE mixture, the total gas yield was reduced by 14.9 mmol gsample −1 relative to the theoretical value. Given that HDPE possessed the highest decomposition temperature, the synergistic interaction was predominantly driven by the inhibitive nature of cellulose char. In contrast, the total gas yields for cellulose-PET and cellulose-PS mixtures increased by 8.7 mmol gsample −1 and 13.3 mmol gsample −1, respectively. The free radicals emanating from cellulose could trigger the decomposition of volatile components from plastics. Concurrently, the decomposition products of plastic could serve as hydrogen donors to stabilize the volatiles of cellulose. The interactions primarily affect the volatiles and tar components of the mixtures. The catalysts amplified gas yields by facilitating the CO2 reforming of tar, therefore, the synergistic interaction became evident upon catalyst addition. Gas chromatography-mass spectrometry analyses of the tar also corroborated the described interaction mechanisms between cellulose and plastics. Thermogravimetric analysis of used catalysts indicated that the synergistic action between cellulose and plastic could effectively diminish coke deposition, thereby preventing swift catalyst deactivation.

The Synergistic Mechanism Between Coke Depositions and Gas for H2 Production from Co-Pyrolysis of Biomass and Plastic Wastes Via Char Supported Catalyst.

Mechanistic Understanding of Efficient Polyethylene Hydrocracking over Two-Dimensional Platinum-Anchored Tungsten Trioxide.

Co-hydropyrolysis of Pine and HDPE over Bimetallic Catalysts: Efficient BTEX Production and Process Mechanism Analysis

Synergistic interactions between cellulose and plastics (PET, HDPE, and PS) during CO2 gasification-catalytic reforming on Ni/CeO2 nanorod catalyst

Polyethylene Hydrogenolysis over Bimetallic Catalyst with Suppression of Methane Formation

Simultaneous production of aromatics-rich bio-oil and carbon nanomaterials from catalytic co-pyrolysis of biomass/plastic wastes and in-line catalytic upgrading of pyrolysis gas

A Study on the Pyrolysis Behavior and Product Evolution of Typical Wood Biomass to Hydrogen-Rich Gas Catalyzed by the Ni-Fe/HZSM-5 Catalyst

Syngas Characteristics From Catalytic Gasification of Polystyrene and Pinewood in CO2 Atmosphere

Pyrolysis gas from biomass and plastics over X-Mo@MgO (X = Ni, Fe, Co) catalysts into functional carbon nanocomposite: Gas reforming reaction and proper process mechanisms

Preparation of hydrogen-rich gas by catalytic pyrolysis of straw-plastic mixture with nickel-based honeycomb cinder

Co-production of Hydrogen and Carbon Nanotubes Via Catalytic Pyrolysis of Polyethylene over Fe/ZSM-5 Catalysts: Effect of Fe Loading on the Catalytic Activity

Production of catalytic-upgraded pyrolysis products from oiltea camellia shell and polypropylene using NiCe-X/Al2O3 and ZrO2 catalyst (X = Fe, Co)

Influence of Char Intermediates on Synergistic Effects During Co-Pyrolysis of Pinewood and Polycarbonate

Enhancement of hydrogen and carbon nanotubes production from hierarchical Ni/ZSM-5 catalyzed polyethylene pyrolysis

The effects of pore structures and functional groups on the catalytic performance of activated carbon catalysts for the co-pyrolysis of biomass and plastic into aromatics and hydrogen-rich syngas

Synergistic Catalytic Biomass-H2o Gasification for H2 Production and Biochar Etching Mechanism: Experimental and DFT Studies

Mechanism of synergistic effects and kinetic analysis in bamboo-LDPE waste ex-situ catalytic co-pyrolysis for enhanced aromatic hydrocarbon production via CeZrAl and HZSM-5 dual catalyst

Co-pyrolysis–catalytic steam reforming of cellulose/lignin with polyethylene/polystyrene for the production of hydrogen

Pyrolysis-catalysis of different waste plastics over Fe/Al2O3 catalyst: High-value hydrogen, liquid fuels, carbon nanotubes and possible reaction mechanisms

Co-pyrolysis of pinewood and HDPE: pyrolysis characteristics and kinetic behaviors study

Synergistic Effects of Fe@C Catalysts Prepared at Different Carbonization Temperatures on Microwave Co-Pyrolysis of Biomass and Plastic for High-Value Oil and Gas Production