Abstract:This study aims to investigate refined wind load parameters on main rods and the influence of wind-loading mode on wind-induced responses of the angle-steel transmission tower. The wind load parameters discussed in this study include drag coefficients, wind load distribution factors and skewed wind load factors. To achieve the aim, wind tunnel tests were conducted to explore aerodynamic loads for integrated frame, single frame, and main rod models of cross-arm and tower body. The wind load parameters of the different models were investigated. In addition, a series of wind-induced vibration simulation was applied to examine the wind-induced responses of an ultra-high voltage (UHV) transmission tower with a long cross-arm under concentrated and distributed wind loads. The simulated results under the two types of wind loads were compared. The results show that the longitudinal drag coefficients of the main rods are smaller than the values of the integrated frame, and equivalent on average to the values of the single frame. The experimental shielding factor of the cross-arm is larger than those in different standards due to the joint drag effects of leeward, upper, and lower faces of the cross-arm in the wind tunnel test. The experimented shielding factor of the tower body is in line with those referring to the Chinese and AS/NZS standards, and slightly larger than those based on the British and JEC standards. The skewed wind load factors of the main rod models are quite different from other models for cross-arm and tower body. The wind-induced vibration simulation suggests that, the wind-loading mode has limited impact on the displacements, accelerations, and gust factors of the transmission tower, but significantly influences the maximum normal stresses (MNSs) of the rods' cross-sections. The MNSs caused by the distributed wind loads are obviously greater than those caused by concentrated wind loads, especially for the rods at the two ends of the cross-arm.

Wind-induced Dynamic Performance of a Super-Large Hyperbolic Steel-Truss Cooling Tower

Wind Effects on Rough-Walled and Smooth-Walled Large Cooling Towers

A Comprehensive High Reynolds Number Effects Simulation Method for Wind Pressures on Cooling Tower Models

Study on Dynamic Characteristics of the Ower-Foundation of 1.5 MW Wind Turbine

Wind-induced Response of Large Hyperbolic Cooling Tower Considering Soil-Structure Interaction

Tower Configuration Impacts on the Thermal and Flow Performance of Steel-Truss Natural Draft Dry Cooling System

Analysis of wind load on large hyperbolic cooling tower considering interactionbetween internal and external pressure

Influence of wind pressure distribution on wind-induced responses and local stability of a cooling tower

Thermal performance and structural behaviour of steel hyperbolic cooling tower with holes

Typhoon-Induced Failure Process and Collapse Mechanism of Super-Large Cooling Tower Based on WRF-CFD-LS/DYNA Nesting Technology

EXPERIMENTAL STUDY OF STABILITY OF NATURAL DRAFT COOLING TOWER MODEL BASED ON 3D PRINTING

Tornado-induced instability assessment of super large hyperbolic reinforced concrete cooling towers

A new atmospheric boundary layer wind tunnel simulation methodology for wind effects on large cooling towers considering wind environment variations

RESEARCH ON A NEW STRUCTURAL SYSTEM OF STEEL AIR-COOLING TOWER

Cooling Performance Of Cylinder-Frustum Natural Draft Dry Cooling Tower

Multi-Objective Optimization Analysis of Structural Design for Large Cooling Towers

Numerical Simulation of Fluctuating Wind Load and Wind-Induced Response of Large Hyperbolic Cooling Tower

Interference effect of wind-induced response on large hyperbolic cooling tower

Nonlinear coupling vibration analyses of large-scale wind turbine system

Natural Vibration Characteristic of Large Hyperbolic Cooling Towers

Influence of Refined Wind Load Parameters and Wind-Loading Mode on Wind-Induced Responses of a Long Cross-Arm Angle-Steel Transmission Tower