Abstract:The preparation of monolithic silica aerogels via non-supercritical drying is realized by the following procedures: (1) formation of silica alcogels with perfect network structure by controlling two-step hydrolysis and condensation reaction rates of tetraethoxysilane; (2) improvement and reinforcement of network structure and strength of silica gels through exchanging the pore fluid with ethanol solvent thoroughly, immersing of gels in the ethanol solutions of tetraethyoxysilane and aging; (3) gradual drying under ethanol fluid whose surface tension is much lower than water under ambient pressure. The resulting aerogels were characterized by means of SEM, TEM, TG-DTA, XRD, and adsorption-desorption techniques. It is found that the aerogels, which are made up of uniform spherical nanoparticles with diameters of about 10 nm, are of coherent network structures. Furthermore, the aerogels are porous, and the porosity is as high as 91%. The diameter of the pore sizes is in the range of 10 similar to 30 nm, and the density of the aerogels is low (200 similar to 400 kg . m(-3)). The specific surface area of the aerogels can be as high as 625. 65 m(2) . g(-1). The appearance, microstructure, diameters of primary particles and pore size distributions of the aerogels are in concordance with those prepared by conventional supercritical drying. It is demonstrated that the quality of the resulting aerogels is affected by the preparation conditions adopted in the preparation process. In fact, by adjusting the proportions of the reaction systems, and controlling the adding amounts of acid and base during the two-step hydrolysis and condensation process, silica aerogels with required density, definite strength and ideal morphology can be produced.

Preparation of the Ultralow Density Aerogel and Its Application

Preparation and Application of Ultralight Nanofiber Aerogels

Advances on Dimensional Structure Designs and Functional Applications of Aerogels

Aerogel low-cost preparation and its application in the field of building insulation

Preparation and Applications of Aerogel Microspheres

Progress in Preparation and Application of Density-graded Aerogels for Space Exploration

PREPARATION，PROPERTIES AND APPLICATION OF CARBON AEROGEL

Preparation of Silica Aerogels Via Ambient Pressure Drying

Preparation and Application of Carbon Aerogels

A Special Material or a New State of Matter: A Review and Reconsideration of the Aerogel

3d Assembly Of Preformed Colloidal Nanoparticles Into Gels And Aerogels: Function-Led Design

Advances in Polymer Aerogels

Preparation of Silica Aerogels Via Non-supercritical Drying and Their Formation Process

A review of research progress on carbon aerogel

Preparation of Silica Aerogels by Non-Supercritical Drying

Preparation of the methyltriethoxysilane based aerogel monolith with an ultra-low density and excellent mechanical properties by ambient pressure drying

Fabrication and Performance of Various Aerogel Microspheres

Preparation of Aerogels by Non-supercritical Drying Technique

Low-density carbon aerogels fabrication and its thermal and mechanical properties

Recent advances in novel aerogels through the hybrid aggregation of inorganic nanomaterials and polymeric fibers for thermal insulation

Aerogels: promising nanostructured materials for energy conversion and storage applications