Abstract:In a cryogenic environment, components like bearings with interacting surfaces in relative motion (tribosystems) often generate undesired heat and experience high wear. Because the properties of conventional bearing materials like stainless steel cannot be applied to this temperature range, the PVD coating based on metal–metal pairs with better frictional properties must be employed. To test the suitability of the Ni–Cu–Ag-based PVD coatings of hybrid bearings for liquid rocket engine turbopumps and to obtain reliable coating material data in the extreme environment, the tribological behaviors of coatings under the cryogenic fluid (liquid oxygen and liquid nitrogen) and water lubricated conditions are studied, respectively. In the paper, the specimens are in a vibrocryotribometer with the ball-on-plane contact type, and various running conditions in terms of lubricants, contacting loading, and contacting velocity are examined. The simulated experiment for testing the actual tribological performance of Ni–Cu–Ag-based PVD coatings for hybrid bearings is tested. The results of the tests indicate that the coatings can be suitable for cryogenic tribosystems of turbopumps. In the cryogenic environment, the volume wear rate of coatings increases rapidly with the contacting loading, but 15min later, the volume wear volume of coatings turns into 2.5–15×10−4mm3. Besides, under the liquid oxygen condition in simulating the liquid rocket engine turbopumps environment, the friction coefficients are 0.03–0.1.

Fundamental Tribological Experiments and Antifriction Design of Novel Superconducting Tilting Pad Bearing for Liquid Rocket Engine

Dynamic Characteristics of High-TcSuperconductor and Hydrodynamic Fluid-Film Compound Bearing for Rocket Engine

Lubrication Performance Analysis of Lead-Bismuth Internal-Feedback Bearings in the Nuclear Main Pump System

Static Characteristics of High-Temperature Superconductor and Hydrodynamic Fluid-Film Compound Bearing for Rocket Engine

Levitation Force of Small Clearance Superconductor–magnet System under Non-Coaxial Condition

A Novel Compound Mechanical Seal of Reusable Rocket Turbopump with Superconducting Magnetic Force Improving Lubrication and Stability

Hybrid Journal Bearings For Cryogenic Liquid Rocket Engine Turbopumps

Development Status and Prospects of High-Tc Superconducting Magnetic Bearing

Lubrication and Stability Enhancement by Attaching Superconducting Magnetic Force on Non-Contacting Mechanical Seals for Reusable Rocket Turbopump

An Overview of Bearing Candidates for the Next Generation of Reusable Liquid Rocket Turbopumps

Experimental Research of Multileaf Oil Lubricated Foil Bearing

The Tribological Behavior of Ni–Cu–Ag-based PVD Coatings for Hybrid Bearings under Different Lubrication Conditions

Research on Improving the Tribological Properties of Bearings under Cryogenic Conditions

Analysis of the lubrication process with composition of solid lubricants of laser-modified sliding surfaces

Experiment for Water-lubricated High-speed Hydrostatic Journal Bearings

A study on improving friction and wear performance of bearing bush in radial piston hydraulic motor

Theoretical and Experimental Results of Water-Lubricated, High-Speed, Short-Capillary-Compensated Hybrid Journal Bearings

The Tribological Properties of Nano-Lubricants and Their Application on Bearings: Recent Research Progress

The Preparation of Polytrifluorochloroethylene (PCTFE) Micro-Particles and Application on Treating Bearing Steel Surfaces to Improve the Lubrication Effect for Copper-Graphite (Cu/c)

A Numerical Investigation of Mixed Thermal Elastohydrodynamic Lubrication in Tilting-Pad Journal Bearing

Experimental Study of Full-Size Tilting-Pad Bearings and Research of the Lubrication and Vibration Performance