Abstract:Purpose Cavitation plays a significant role in the performance of textured journal bearings. Furthermore, because of the usage of low-viscosity lubricants and the high working speed of machines, it is pertinent to consider the lubricant inertia while analyzing the operating characteristics of bearings. This paper aims to investigate the influence of lubricant inertia in the case of a spherically textured journal bearing, considering both protrusion and dimple texturing and implementing the mass-conserving (JFO) boundary conditions. Design/methodology/approach A novel modified Reynolds equation has been developed to accommodate the effects of lubricant inertia and cavitation. The cavitation is treated by using mass-conserving (Jakobsson−Floberg−Olsson [JFO]) boundary conditions. The governing equation is solved by the Gauss−Seidel method with successive over-relaxation. To enhance computational efficiency and expedite the convergence process, the progressive mesh densification (PMD) method has been integrated into the solution process. Findings The current study indicates that the JFO boundary conditions result in higher load-carrying capacity and lesser friction variables for heavily loaded bearings, whereas the flow coefficient is reduced due to the application of JFO boundary conditions. The lubricant inertia effect enhances the flow coefficients for lightly loaded and protrusion-textured bearings. Originality/value It is crucial to understand the combined effects of lubricant inertia and cavitation for the effective design of textured journal bearings. The findings from this work will help in designing textured journal bearings more effectively and accurately, particularly when low-viscosity oil is used. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-07-2024-0276/

Study of Effect of Inertia Forces of Oil Film on Performance of a Journal–thrust Floating Ring Bearing Using a New Method

Lubrication and stability analysis of nonlinear rotor-bearing system

Inertia Effect On The Load Capacity Of Large Water-Lubricated Thrust Bearing

A New Method for Studying the 3D Transient Flow of Misaligned Journal Bearings in Flexible Rotor-Bearing Systems

On the Performance of Dynamically Loaded Journal Bearings Lubricated with Couple Stress Fluids

A Study of A Journal Bearing Lubricated by Couple Stress Fluids Considering Thermal and Cavitation Effects

Effect of lubricant inertia on textured journal bearing implementing mass conserving (JFO) boundary conditions

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps

Study on performance of composite journal bearing sealed and lubricated with ferrofluid

New Numerical Solution for Self-Acting Gas Journal Bearings

WEIGHTED FINITE ELEMENT METHOD FOR COMPUTING NONLINEAR OIL-FILM FORCES IN JOURNAL BEARING

Influence of Cavitation Pressure on Performance of Sliding Bearings

ANALYSIS OF THE PERFORMANCE OF JOURNAL BEARING WITH JFO BOUNDARY CONDITION

Thermohydrodynamic Study on Journal Bearings Using Finite Element Analysis

Analysis of Fluid-Thermal Coupling in Ferrofluid Bearing Used in High Speed Machines

Effect of Effective Viscosity on Performance of Micro Gas Journal Bearings

Thermohydrodynamic Analysis of Journal Bearings Lubricated with Couple Stress Fluids

Investigation on the dynamic behaviors of a rod fastening rotor based on an analytical solution of the oil film force of the supporting bearing

Numerical Analysis of Journal Bearings Lubricated with Micropolar Fluids Including Thermal and Cavitating Effects

A Study on Adaptive Variable Structure Journal Bearing With Coupling Two-step Films

Application of Computational Fluid Dynamics and Fluid Structure Interaction Techniques for Calculating the 3d Transient Flow of Journal Bearings Coupled with Rotor Systems