Abstract:Purpose Cavitation plays a significant role in the performance of textured journal bearings. Furthermore, because of the usage of low-viscosity lubricants and the high working speed of machines, it is pertinent to consider the lubricant inertia while analyzing the operating characteristics of bearings. This paper aims to investigate the influence of lubricant inertia in the case of a spherically textured journal bearing, considering both protrusion and dimple texturing and implementing the mass-conserving (JFO) boundary conditions. Design/methodology/approach A novel modified Reynolds equation has been developed to accommodate the effects of lubricant inertia and cavitation. The cavitation is treated by using mass-conserving (Jakobsson−Floberg−Olsson [JFO]) boundary conditions. The governing equation is solved by the Gauss−Seidel method with successive over-relaxation. To enhance computational efficiency and expedite the convergence process, the progressive mesh densification (PMD) method has been integrated into the solution process. Findings The current study indicates that the JFO boundary conditions result in higher load-carrying capacity and lesser friction variables for heavily loaded bearings, whereas the flow coefficient is reduced due to the application of JFO boundary conditions. The lubricant inertia effect enhances the flow coefficients for lightly loaded and protrusion-textured bearings. Originality/value It is crucial to understand the combined effects of lubricant inertia and cavitation for the effective design of textured journal bearings. The findings from this work will help in designing textured journal bearings more effectively and accurately, particularly when low-viscosity oil is used. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-07-2024-0276/

Inertia Effect On The Load Capacity Of Large Water-Lubricated Thrust Bearing

Effects of Lubricant Viscosity-Temperature Relationship on the Capacity of Sliding Bearing

Study on the Water Lubricated Large-scale Tilting Pad Thrust Bearing by Finite Element Method

Research on the Support Performance of Internal Feedback Hydrostatic Thrust and Journal Bearing Considering Load Effect

Load Capacity Analysis of Water Lubricated Tapered-Land Thrust Bearing Based on CFD

The Lubrication Performance of Water Lubricated Bearing with Consideration of Wall Slip and Inertial Force

Numerical Simulation of the Flow in A Large-Scale Thrust Bearing

Numerical simulations for the fluid-thermal-structural interaction lubrication in a tilting pad thrust bearing

Analysis of lubrication characteristics of dynamic-static pressure hybrid thrust bearing considering key factors under eccentric loads

Investigation of Slip/no-Slip Surface for Two-Dimensional Large Tilting Pad Thrust Bearing

A study of inlet temperature models of a large size tilting thrust bearing comparison between theory and experiment

Numerical Investigation of Static Characteristic of a Tilting-Pad Journal Bearing Using Shear Stress Transport Model and Air Backflow

Study On Load Capacity And Dynamic Characteristics Of The Wave Bearing At Infinite Compressibility Number

Analytical Method for Hydrodynamic Force in Finite-Length Tilting-Pad Journal Bearing Including Turbulence Effect

Numerical analysis of turbulence effect for coupled journal-thrust water-lubricated bearing with micro grooves

Effect of lubricant inertia on textured journal bearing implementing mass conserving (JFO) boundary conditions

Effect of Elastohydrodynamic Lubrication on the Dynamic Analysis of Ball Bearing

Study on the Dynamic Characteristics of the Water-Lubricated Tilting-Pad Radial Bearing Considering Temperature-Viscosity Effect

Thd Effects of Static Performance Characteristics of Infinitely Wide Turbulent Journal Bearings

The Analysis of Elasto-hydrodynamic Lubrication in the Finite-length Journal Bearing

Effects of support structure on lubricating properties of bi-directional thrust bearings