Abstract:Zinc (Zn) alloys are a promising biodegradable material for vascular stent applications. This study aimed to fabricate biodegradable Zn-2.0Cu-0.5Mn alloy micro-tubes and vascular stents with high dimensional accuracy and suitable mechanical properties, and to investigate their microstructure, texture, mechanical properties and corrosion behavior. The micro-tubes and vascular stents were successfully fabricated by a combined process of extrusion, drawing, laser cutting and electrochemical polishing. The microstructures of as-extruded and as-drawn micro-tubes consisted of Zn matrix with near-equiaxed grains (average grain size: ∼2 µm) and second phases of ε (CuZn4) and MnZn13 with different sizes. The texture evolved from basal planes approximately paralleling to deformation direction for as-extruded micro-tube to approximately perpendicular to deformation direction for as-drawn micro-tube, because predominant deformation mechanisms changed from basal <a> dislocation slip during tube extrusion to prismatic <a> dislocation, pyramidal <c+a> dislocations, and {101¯2} twins during tube drawing. As-drawn micro-tube exhibited suitable mechanical properties with an ultimate tensile strength of about 298 MPa and elongation of about 26% as a stent material. Moreover, the processed stent with a thickness of about 125 µm possessed sufficient radial strength of about 150 kPa and good balloon expandability. In addition, as-drawn tube exhibited an in vitro corrosion rate of about 158 µm/year with a basically uniform corrosion morphology. These results indicated that biodegradable Zn-2.0Cu-0.5Mn alloy is a promising vascular stent material candidate, and the procedure for processing the micro-tube and stent is practical and effective. STATEMENT OF SIGNIFICANCE: Fabrication of micro-tubes followed by laser cutting and polishing is a common way to prepare metallic vascular stents. However, it is quite challenging to fabricate Zn-based stents using this standard method, and there is a lack of studies reporting processing details in the past. Biodegradable Zn-2.0Cu-0.5Mn alloy micro-tubes and vascular stents with high dimensional accuracy and suitable mechanical properties were successfully fabricated by a combined process in this study. As-drawn micro-tube exhibited an ultimate tensile strength of about 298 MPa and elongation of about 26%. The stent possessed sufficient radial strength of about 150 kPa and good balloon expandability. We demonstrated a practical method to fabricate biodegradable Zn-based micro-tubes and stents with high dimensional accuracy and mechanical properties.

Beta TiZrSnMoNb Titanium Alloy Tube for Stent

Research of Ti3Mo2Sn3Zr25Nb Alloy for Stent

Microstructure, elastic deformation behavior and mechanical properties of biomedical β-type titanium alloy thin-tube used for stents

In Vitro Characterization of ZM21 Mini-Tube Used for Biodegradable Metallic Stent

Investigation on Near-β Titanium Alloy Ti-5Zr-3Sn-5Mo-15Nb for Surgical Implant Materials

Hot Gas Pressure Forming and Post Aging Treatment of Ti-22Al-24.5Nb-0.5Mo Square Tubes

Process, Microstructure, Properties of Newly Developed β-Type Biomedical Titanium Alloy TLM

Novel Ti-Ta-Hf-Zr Alloys with Promising Mechanical Properties for Prospective Stent Applications

Mechanical Strengthening Mechanism of Zn-Li Alloy and Its Mini Tube As Potential Absorbable Stent Material

The processing of Mg alloy micro-tubes for biodegradable vascular stents

Microstructure and Mechanical Properties of A Newly Developed Low Young'S Modulus Ti-15zr-5cr-2al Biomedical Alloy

Mechanical Properties and Corrosion Behavior of a Beta Titanium Alloy

The Microstructure, Mechanical Properties, and Corrosion Resistance of a Novel Extruded Titanium Alloy

Development of Biomedical Near β Titanium Alloys

Microstructure, Texture Evolution and Mechanical Properties of Cold Rolled Ti-32.5Nb-6.8Zr-2.7Sn Biomedical Beta Titanium Alloy

Microstructure and Texture Characterstics of a Near-Alpha Titanium Alloy Tube

Fabrication and characterization of biodegradable Zn-Cu-Mn alloy micro-tubes and vascular stents: Microstructure, texture, mechanical properties and corrosion behavior

Study of a new titanium alloyTi-39Nb-5.1Ta-7.1Zr for biomedical application

Microstructures and Tensile Properties of a High Strength Β Titanium Alloy Ti5Al4Zr8Mo7V by Near Β Forging and Β-Transus Forging

Microstructures and Mechanical Properties of a New Titanium Alloy for Surgical Implant Application

Effect of Alloy Element,Process and Heat Treatment on Mechanical Properties of β-Type Biomedical Titanium Alloy